MAX7042 RX center frequency tuning

Question

Hi all, 
 The MAX7042 can be tuned to one of four frequencies using the 2 frequency-select bits FSEL1 and FSEL2:308, 315, 418, and 433.92MHz. 
 Is it possible to use the RX center frequency with the following frequency combinations ? 
 Is there something wrong with the internal circuitry? 
 RX:312.5 MHz , xtal REF:9.43125 MHz , LO:301.8 MHz( 9.43125 *32) , IF:10.7 MHz 
 and select L2 and C9 of t he LC tank filter to resonate at the RF input frequency,312.5 MHz. 
 
 Best regards, 
 sss

emassa · Accepted Answer

Only Maxim ATE products are supported on EngineerZone at this time. Over the next several months, you will see more Maxim products being supported in EngineerZone. Please visit one of the technical support pages on our newly integrated website below for assistance with Maxim Integrated products. 
 EN - https://www.analog.com/en/support/technical-support.html# CN - https://support.analog.com/zh-CN/technical-support/ JP - https://support.analog.com/ja-JP/technical-support/

Electronic Design Services - PartnerZone

Products In This Thread

MAX7042 RX center frequency tuning

Top Replies