About the crystal selection of MAX7044

Question

Hi, 
 The datasheet of MAX7044 says "The crystal oscillator in the MAX7044 is designed to present a capacitance of approximately 3pF between the XTAL1 and XTAL2 pins." That means there are an extra 3pF load capacitor internal the chip, right? And it won't prevent me to use external load capacitors, if I use a crystal with larger load capacitor, I need use external load capacitors, right? 
 Thanks.

RFP · Accepted Answer

Hello, 
 Please note the crystal oscillator in the MAX7044 is designed to present a capacitance of approximately 3pF between the XTAL1 and XTAL2 pins. Yes correct. Please read page 7 and 8 of the data sheet (crystal oscillator section). 
 https://www.analog.com/media/en/technical-documentation/data-sheets/MAX7044.pdf 
 Please refer to crystals mentioned in MAX7044 EVK data sheet as reference. 
 MAX7044 Evaluation Kit - Evaluates: MAX7044 (analog.com) 
 Thank You 
 RF Products support team.)

Partner Forums

Partner Libraries

Products Mentioned

Thread Details

About the crystal selection of MAX7044

Thread Summary

Edit Notes

Thread Notes