Category: Software
Product Number: ADRV9361z7035 BOB-LVDS
Software Version: 2022.2 branch ADI
HI,
When I build a petalinux project on XSA openwifi according to ADI recommendations, I get an error with building the device tree:
ERROR: device-tree-xilinx-v2022.2+gitAUTOINC+24d29888d0-r0 do_configure: ExecutionError('/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/temp/run.do_configure.2979308', 1, None, None)
ERROR: Logfile of failure stored in: /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/temp/log.do_configure.2979308
Log data follows:
| DEBUG: Executing python function extend_recipe_sysroot
| NOTE: Direct dependencies are ['/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-devtools/quilt/quilt-native_0.66.bb:do_populate_sysroot', '/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-kernel/kmod/kmod-native_git.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-devtools/python/python3_3.9.9.bb:do_populate_sysroot', '/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/meta-virtualization/recipes-kernel/dtc/python3-dtc_1.6.1.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-devtools/bison/bison_3.7.6.bb:do_populate_sysroot', '/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-devtools/gcc/gcc-cross_11.2.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-extended/bc/bc_1.07.1.bb:do_populate_sysroot', '/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-devtools/binutils/binutils-cross_2.37.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-extended/xz/xz_5.2.5.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-kernel/dtc/dtc_1.6.1.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-bsp/u-boot/u-boot-tools_2021.07.bb:do_populate_sysroot', 'virtual:default:/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/core/meta/recipes-devtools/python/python3-pyyaml_5.4.1.bb:do_populate_sysroot']
| NOTE: Installed into sysroot: ['kmod-default', 'kern-tools-default', 'bison-default', 'gcc-cross-arm', 'bc-default', 'binutils-cross-arm', 'u-boot-tools-default', 'gtk-doc-default', 'libmpc-default', 'gmp-default', 'mpfr-default', 'linux-libc-headers']
| NOTE: Skipping as already exists in sysroot: ['quilt-default', 'python3-default', 'pseudo-default', 'python3-dtc-default', 'xz-default', 'dtc-default', 'patch-default', 'python3-pyyaml-default', 'libffi-default', 'libtirpc-default', 'sqlite3-default', 'gdbm-default', 'openssl-default', 'libtool-default', 'bzip2-default', 'pkgconfig-default', 'zlib-default', 'autoconf-default', 'util-linux-default', 'libnsl2-default', 'readline-default', 'automake-default', 'libyaml-default', 'flex-default', 'swig-default', 'texinfo-dummy-default', 'gnu-config-default', 'python3-cython-default', 'python3-setuptools-default', 'gettext-minimal-default', 'attr-default', 'm4-default', 'util-linux-libuuid-default', 'ncurses-default', 'libpcre2-default', 'libcap-ng-default', 'libpcre-default']
| DEBUG: sed -e 's:^[^/]*/:/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/recipe-sysroot-default/:g' /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/sysroots-components/x86_64/bison-default/fixmepath /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/sysroots-components/x86_64/gcc-cross-arm/fixmepath /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/sysroots-components/x86_64/gtk-doc-default/fixmepath /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/sysroots-components/x86_64/gmp-default/fixmepath | xargs sed -i -e 's:FIXMESTAGINGDIRTARGET:/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/recipe-sysroot:g; s:FIXMESTAGINGDIRHOST:/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/recipe-sysroot-default:g' -e 's:FIXME_PSEUDO_SYSROOT:/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/sysroots-components/x86_64/pseudo-default:g' -e 's:FIXME_HOSTTOOLS_DIR:/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/hosttools:g' -e 's:FIXME_PKGDATA_DIR:/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/pkgdata/zynq-generic:g' -e 's:FIXME_PSEUDO_LOCALSTATEDIR:/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/pseudo/:g' -e 's:FIXME_LOGFIFO:/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/temp/fifo.2979308:g'
| DEBUG: Python function extend_recipe_sysroot finished
| DEBUG: Executing shell function do_configure
| ENABLE_OPENAMP_DTSI is not SET (0)
| MISC_ARG is -hdf_type xsa -yamlconf /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/device-tree.yaml
| APP_ARG is -app "device-tree"
| Using xsct from: /dysk/usr/tools/Xilinx_2022/PetaLinux/2022.2/tool/tools/xsct//bin/xsct
| cmd is: xsct -sdx -nodisp /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/dtgen.tcl -ws /dysk/PETA_2022_2/openwifiadrv9361adi/project-spec/configs/../../components/plnx_workspace/device-tree -pname device-tree -rp /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/git -processor_ip ps7_cortexa9 -hdf /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/deploy/images/zynq-generic/Xilinx-zynq-generic.xsa -arch 32 -app "device-tree" -hdf_type xsa -yamlconf /dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/device-tree.yaml
| WARNING: sdtgen package cannot be loaded. System Device tree commands will not
|
| be available
| INFO: [Hsi 55-2053] elapsed time for repository (/dysk/usr/tools/Xilinx_2022/PetaLinux/2022.2/tool/tools/xsct/data/embeddedsw) loading 0 seconds
| can't read "afi2": no such variable
| ERROR: [Hsi 55-1545] Problem running tcl command ::sw_device_tree::generate : can't read "afi2": no such variable
| while executing
| "get_cells -hier $afi2"
| (procedure "add_or_get_bus_node" line 244)
| invoked from within
| "add_or_get_bus_node $ip $default_dts"
| (procedure "gen_peripheral_nodes" line 66)
| invoked from within
| "gen_peripheral_nodes $drv_handle "create_node_only""
| ("foreach" body line 3)
| invoked from within
| "foreach drv_handle [get_drivers] {
| # generate the default properties
| gen_peripheral_nodes $drv_handle "create_node_only"
| gen_r..."
| (procedure "::sw_device_tree::generate" line 3)
| invoked from within
| "::sw_device_tree::generate device_tree"
| ERROR: [Hsi 55-1442] Error(s) while running TCL procedure generate()
| generate_target failed
| while executing
| "error "generate_target failed""
| invoked from within
| "if {[catch {hsi generate_target -dir $project} res]} {
| error "generate_target failed"
| }"
| (file "/dysk/PETA_2022_2/openwifiadrv9361adi/build/tmp/work/zynq_generic-xilinx-linux-gnueabi/device-tree/xilinx-v2022.2+gitAUTOINC+24d29888d0-r0/dtgen.tcl" line 49)
| WARNING: exit code 1 from a shell command.
ERROR: Task (/dysk/PETA_2022_2/openwifiadrv9361adi/components/yocto/layers/meta-xilinx/meta-xilinx-core/recipes-bsp/device-tree/device-tree.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4403 tasks of which 0 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
All tools are 2022.2, including meta-adi. The project is built using Vitis. There's a boot.bin and a kernel from the XSA analog repo, derived from the project https://github.com/open-sdr Higher versions, such as 2023.2, have a similar setup. Build according to the instructions for the specific branch. I can provide XSA and the entire project in VIVADO.
