Raspbian Bookworm to Kuiper (-like) Linux OS

Question

Hello, 
 Kuiper Linux is used to evaluate ADI devices using a Raspberry Pi. 
 I am building a prototype that will include an AD7124 or AD4130 RTD measuring board and also some other devices. 
 I would like to use the vanilla Raspbian as an starting point and add whatever is needed to interface with the ADC. 
 Is there a page listing what is needed to run some of the evaluation tools on a fresh Raspbian OS? 
 Enable IIO in kernel, etc ? 
 Modules to load? 
 ADI drivers? 
 Libraries needed? 
 Repos? 
 Pyadi-IIO, etc? 
 
 Thank you for your help.

mlradu · Accepted Answer

Hi chbarg , 
 You can find the software tools here: https://wiki.analog.com/resources/tools-software/linux-software/kuiper-linux 
 If you want to build you kernel to run on Raspberry Pi boards you can take a look here: https://wiki.analog.com/resources/tools-software/linux-build/generic/raspberrypi 
 Kuiper starts from Raspberry Pi OS 11 (bullseye). If your intention is to start from bookworm, you can try Kuiper 2.0. 
 Here is a link to the github: https://github.com/analogdevicesinc/adi-kuiper-gen/tree/staging/kuiper2.0 
 You can build it yourself using the steps in README or download it from here: https://artprodcus3.artifacts.visualstudio.com/Adb5ce8ff-2df6-4e7b-a491-7c0f5e26801a/02a28b00-b3c8-4fdf-af9c-c2460499147f/_apis/artifact/cGlwZWxpbmVhcnRpZmFjdDovL0FuYWxvZ0RldmljZXMvcHJvamVjdElkLzAyYTI4YjAwLWIzYzgtNGZkZi1hZjljLWMyNDYwNDk5MTQ3Zi9idWlsZElkLzM3NzIwL2FydGlmYWN0TmFtZS9rdWlwZXJfdm9sdW1lX2Z1bGxfMzI1/content?format=file&subPath=%2Fimage_2024-04-03-ADI-Kuiper-Linux-armhf.zip 
 Hope it meets your needs, 
 Larisa)

Electronic Design Services - PartnerZone

Products Mentioned

Raspbian Bookworm to Kuiper (-like) Linux OS