ADRV9002+ZCU102 device tree addresses

Question

In the device tree for the ADRV9002+ZCU102, there are some addresses specified which I would like to confirm are correct. 
 https://github.com/analogdevicesinc/linux/blob/2021_R2/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9002.dts#L130 uses 84A04000, but 
 https://github.com/analogdevicesinc/linux/blob/2021_R2/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9002.dts#L132 use 84A0A000 
 
 Similarly, there are differences at 
 https://github.com/analogdevicesinc/linux/blob/2021_R2/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9002.dts#L149 and 
 https://github.com/analogdevicesinc/linux/blob/2021_R2/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9002.dts#L151 
 
 https://github.com/analogdevicesinc/linux/blob/2021_R2/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9002.dts#L158 and 
 https://github.com/analogdevicesinc/linux/blob/2021_R2/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9002.dts#L160 
 and 
 https://github.com/analogdevicesinc/linux/blob/2021_R2/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9002.dts#L169 and 
 https://github.com/analogdevicesinc/linux/blob/2021_R2/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9002.dts#L171 
 
 Thank you.

nsa · Accepted Answer

Hi, 
 The addresses that matter are the ones in the 'reg = <...>'. That said, the line defining the node (' axi_adrv9002_core_tx1: axi-adrv9002-tx-lpc@84A04000 ') should be coherent with the reg property... 
 - Nuno S&aacute;

Electronic Design Services - PartnerZone

ADRV9002+ZCU102 device tree addresses

Top Replies