• State Verified Answer
  • Replies 25 replies
  • Subscribers 57 subscribers
  • Views 6334 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
QEC INIT



		

			

									
					    bobrik_744
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Feb 24, 2022 
				
			
			
		
    

				
		
    
		    		    
		    
		    	
			
    hello i need to disable TX_QEC_init i dont understand how to do it?
    

    in ug-992 Rev. B | Page 73 i see TX_QEC_INIT it turns out it is disabled by default in git repo r2019_2?
    

    uint32_t initCalMask = TX_BB_FILTER | ADC_TUNER | TIA_3DB_CORNER | DC_OFFSET | TX_ATTENUATION_DELAY | RX_GAIN_DELAY | FLASH_CAL | PATH_DELAY | TX_LO_LEAKAGE_INTERNAL | TX_QEC_INIT | LOOPBACK_RX_LO_DELAY | LOOPBACK_RX_RX_QEC_INIT | RX_LO_DELAY | RX_QEC_INIT; 
    

    original question ez.analog.com/.../changing-the-vcxo-80-mhz-ad9375
    
									
			        
		
    

				
						
        

    
    Tags: 
                                            
                 qec correction
                
                                
            
    
    
    

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    
















    
	
    
	
    
					



			








	
	
	
	



Parents
	
      
	

    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Feb 25, 2022 7:52 AM
            
            
					
      
	
      

		
		
      
					
      Hi,
      

      TX_QEC_INIT is always run by default.
      

      You need to modify the source code if you need to skip it.
      

      When using the jesd204-fsm implementation, these is the place where you need to clear the flag from the mask. 
      

      https://github.com/analogdevicesinc/linux/blob/master/drivers/iio/adc/adrv9009.c#L6563
      

      In case you still use the old/deprecated mode, you need to modify the mask here: 
      

      https://github.com/analogdevicesinc/linux/blob/master/drivers/iio/adc/adrv9009.c#L529
      

      

      -Michael
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
				
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	

    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
        
            
						
                            
            
            				
            
                on Feb 28, 2022 12:52 AM
            
            
												
						in reply to mhennerich
					
									
        
	
        

		
		
        
					
        Hello, I tried to disable it, but the error still appears.(ez.analog.com/.../ad9375-zc706)
        

        axi_sysid 45000000.axi-sysid-0: [adrv9371x] on [zc706] git <43cdc6263baf3edb166a3def6fab15bc81c4c729> clean [2022-02-17 11:38:05] UTC
        fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
        usbcore: registered new interface driver snd-usb-audio
        NET: Registered protocol family 10
        Segment Routing with IPv6
        sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
        NET: Registered protocol family 17
        NET: Registered protocol family 36
        Registering SWP/SWPB emulation handler
        [drm] Cannot find any crtc or sizes
        [drm] Initialized axi_hdmi_drm 1.0.0 20120930 for 70e00000.axi_hdmi on minor 0
        ad9371 spi0.1: ad9371_probe : enter
        axi_adxcvr 44a60000.axi-adxcvr-rx: AXI-ADXCVR-RX (17.01.a) using CPLL on GTX2 at 0x44A60000. Number of lanes: 2.
        axi_adxcvr 44a50000.axi-adxcvr-rx-os: AXI-ADXCVR-RX (17.01.a) using CPLL on GTX2 at 0x44A50000. Number of lanes: 2.
        axi_adxcvr 44a80000.axi-adxcvr-tx: AXI-ADXCVR-TX (17.01.a) using QPLL on GTX2 at 0x44A80000. Number of lanes: 4.
        asoc-simple-card adv7511_hdmi_snd: spdif-hifi <-> 75c00000.axi-spdif-tx mapping ok
        ad9371 spi0.1: ad9371_probe : enter
        [drm] Cannot find any crtc or sizes
        ERROR: 364: MYKONOS_waitArmCmdStatus() exited due to ARM error for the desired ARM opcode
        ERROR: 282: Unknown error was encountered.
        ad9371 spi0.1: calsDoneLifetime 0x47, calsDoneLastRun 0x47, calsMinimum 0x4F, initErrCal 0x3, initErrCode 0x1
        ad9371 spi0.1: initCalsCompleted 0x47
        ad9371 spi0.1: errorWord 0x2, statusWord 0x0
        ad9371 spi0.1: ArmCmdStatusByte 0xE
        ad9371 spi0.1: deframerStatus (0x60)
        WARNING: 136: Mismatch detected in MYKONOS_jesd204bIlasCheck()
        ad9371 spi0.1: ILAS mismatch: c7f8
        ad9371 spi0.1: ILAS lanes per converter did not match
        ad9371 spi0.1: ILAS scrambling did not match
        ad9371 spi0.1: ILAS octets per frame did not match
        ad9371 spi0.1: ILAS frames per multiframe did not match
        ad9371 spi0.1: ILAS number of converters did not match
        ad9371 spi0.1: ILAS sample resolution did not match
        ad9371 spi0.1: ILAS control bits per sample did not match
        ad9371 spi0.1: ILAS bits per sample did not match
        ad9371 spi0.1: ILAS checksum did not match
        ERROR: 258: Device not in radioOff/IDLE state. Error in MYKONOS_enableTrackingCals()
        ad9371 spi0.1: Device not in radioOff/IDLE state. Error in MYKONOS_enableTrackingCals()
         (258)
        random: crng init done
        ERROR: 364: MYKONOS_waitArmCmdStatus() exited due to ARM error for the desired ARM opcode
        ERROR: 282: Unknown error was encountered.
        ad9371 spi0.1: calsDoneLifetime 0x47, calsDoneLastRun 0x47, calsMinimum 0x4F, initErrCal 0x3, initErrCode 0x1
        ad9371 spi0.1: initCalsCompleted 0x47
        ad9371 spi0.1: errorWord 0x2, statusWord 0x0
        ad9371 spi0.1: ArmCmdStatusByte 0xE
        ad9371 spi0.1: deframerStatus (0x61)
        WARNING: 136: Mismatch detected in MYKONOS_jesd204bIlasCheck()
        ad9371 spi0.1: ILAS mismatch: c7f8
        ad9371 spi0.1: ILAS lanes per converter did not match
        ad9371 spi0.1: ILAS scrambling did not match
        ad9371 spi0.1: ILAS octets per frame did not match
        ad9371 spi0.1: ILAS frames per multiframe did not match
        ad9371 spi0.1: ILAS number of converters did not match
        ad9371 spi0.1: ILAS sample resolution did not match
        ad9371 spi0.1: ILAS control bits per sample did not match
        ad9371 spi0.1: ILAS bits per sample did not match
        ad9371 spi0.1: ILAS checksum did not match
        ERROR: 258: Device not in radioOff/IDLE state. Error in MYKONOS_enableTrackingCals()
        ad9371 spi0.1: Device not in radioOff/IDLE state. Error in MYKONOS_enableTrackingCals()
         (258)
        ad9371: probe of spi0.1 failed with error -14
        input: gpio_keys as /devices/soc0/gpio_keys/input/input0
        rtc-pcf8563 5-0051: setting system clock to 2022-02-28 05:38:15 UTC (1646026695)
        clk: Not disabling unused clocks
        ALSA device list:
         #0: HDMI monitor
        EXT4-fs warning (device mmcblk0p2): ext4_clear_journal_err:4946: Filesystem error recorded from previous mount: IO failure
        EXT4-fs warning (device mmcblk0p2): ext4_clear_journal_err:4947: Marking fs in need of filesystem check.
        EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
        EXT4-fs (mmcblk0p2): recovery complete
        EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
        VFS: Mounted root (ext4 filesystem) on device 179:2.
        devtmpfs: mounted
        Freeing unused kernel memory: 1024K
        Run /sbin/init as init process
        systemd[1]: Failed to lookup module alias 'autofs4': Function not implemented
        systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
        systemd[1]: Detected architecture arm.
        

        Welcome to Kuiper GNU/Linux 10 (buster)!
        
			
        

		
			
	      

		
		
	
        
	
        
		
        
			
		
        
	
        
	
        
		
						
						
				
						
				
				
		
		
        
			
		
        
	
        

        

        • 

	

      • 
	
        



	
		
	
	



        
	
        
		
        
							
					
        
		
        
			
													0
							
			
				
									
							        
			
			
			
          
            
						
                            
            
            				
            
                on Mar 3, 2022 3:47 AM
            
            
												
						in reply to mhennerich
					
									
          
	
          

		
		
          
					
          I will try to do it, but it will take time for me, from the changes I added only 3 printk() lines to ad9371.c and changed the device tree according to the profile settings
          
			
          

		
			
	      

		
		
	
          
	
          
		
          
			
		
          
	
          
	
          
		
						
						
				
						
				
				
		
		
          
			
		
          
	
          

          

          • 

	

        • 
	
          



	
		
	
	



          
	
          
		
          
							
					
          
		
          
			
													0
							
			
				
									
							        
			
			
			
            
            
						
                            
            
            				
            
                on Mar 3, 2022 4:49 AM
            
            
												
						in reply to mhennerich
					
									
            
	
            

		
		
            
					
            



            
    
            
        Fullscreen
        dif_linux_driver.txt
        Download
    
            
    
            Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad400x.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad400x.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad6676.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad6676.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7091r5.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7091r5.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7091r-base.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7091r-base.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7091r-base.o.d
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7124.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7124.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7173.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7173.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7266.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7266.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7291.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7291.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7298.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7298.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad738x.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad738x.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7476.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7476.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7606.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7606.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7606.o.d
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7606_par.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7606_par.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7606_spi.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7606_spi.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7766.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7766.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7768-1.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7768-1.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7768.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7768.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7791.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7791.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7793.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7793.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7887.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7887.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad7923.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad7923.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad799x.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad799x.o.cmd
Common subdirectories: drivers/iio/adc/ad9081 and /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/ad9081
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9081.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9081.o.cmd
Common subdirectories: drivers/iio/adc/ad9208 and /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/ad9208
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9208.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9208.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9361_conv.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9361_conv.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9361_conv.o.d
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9361_ext_band_ctrl.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9361_ext_band_ctrl.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9361.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9361.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9361.o.d
diff drivers/iio/adc/ad9371.c /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/ad9371.c
573c573,574
< 
---
> 	
> 	printk("!!!!My Debugger init_call_mask %X\n", initCalMask);
663a665,666
> 	
> 	printk("My Debugger init_call_mask %X\n", initCalMask);
894c897
< 
---
> 	printk("My Debugger init_call_mask %X\n", initCalMask);
895a899
> 	printk("My Debugger init_call_mask %X\n", initCalMask);
1206c1210
< 
---
> 				
3016c3020
< 			PATH_DELAY | TX_LO_LEAKAGE_INTERNAL | TX_QEC_INIT |
---
> 			PATH_DELAY | TX_LO_LEAKAGE_INTERNAL | /*TX_QEC_INIT |*/
4417c4421
< 
---
> 	printk("My Debugger init_call_mask %X\n", phy->init_cal_mask);
4418a4423
> 	printk("My Debugger init_call_mask %X\n", phy->init_cal_mask);
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9371_conv.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9371_conv.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9371_conv.o.d
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9371.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9371.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9467.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9467.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9680.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9680.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad9963.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad9963.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad_adc.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad_adc.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: admc_adc.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .admc_adc.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: admc_ctrl.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .admc_ctrl.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: admc_speed.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .admc_speed.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: adrv9009_conv.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .adrv9009_conv.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .adrv9009_conv.o.d
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: adrv9009.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .adrv9009.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ad_sigma_delta.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad_sigma_delta.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ad_sigma_delta.o.d
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: axi_fmcadc5_sync.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .axi_fmcadc5_sync.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: axi_pulse_capture.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .axi_pulse_capture.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: built-in.a
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .built-in.a.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: cf_axi_adc_core.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .cf_axi_adc_core.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .cf_axi_adc_core.o.d
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: cf_axi_tdd.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .cf_axi_tdd.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ltc2308.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ltc2308.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ltc2471.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ltc2471.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ltc2485.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ltc2485.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: ltc2497.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .ltc2497.o.cmd
Common subdirectories: drivers/iio/adc/mykonos and /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/mykonos
Common subdirectories: drivers/iio/adc/navassa and /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/navassa
Common subdirectories: drivers/iio/adc/talise and /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/talise
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: xilinx-xadc-core.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .xilinx-xadc-core.o.cmd
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: xilinx-xadc-events.o
Only in /home/mars/zc706/linux_from_scratch/linux-2019_R2/drivers/iio/adc/: .xilinx-xadc-events.o.cmd

            

            


            
			
            

		
			
	      

		
		
	
            
	
            
		
            
			
		
            
	
            
	
            
		
						
						
				
						
				
				
		
		
            
			
		
            
	
            

            

            • 

	

          • 
	
            



	
		
	
	



            
	
            
		
            
							
					
            
		
            
			
													0
							
			
				
									
							        
			
			
			
            •  Analog Employees  
            
            
						
                            
            
            				
            
                on Mar 3, 2022 6:21 AM
            
            
												
						in reply to bobrik_744
					
									
            
	
            

		
		
            
					
            Just type git diff.
            

            /linux$ git diff
diff --git a/drivers/iio/adc/ad9371.c b/drivers/iio/adc/ad9371.c
index b05e13c8956d..cb735de2b9bc 100644
--- a/drivers/iio/adc/ad9371.c
+++ b/drivers/iio/adc/ad9371.c
@@ -3114,7 +3114,7 @@ static struct ad9371_phy_platform_data
        AD9371_OF_PROP("adi,default-initial-calibrations-mask", &phy->init_cal_mask,
                        TX_BB_FILTER | ADC_TUNER | TIA_3DB_CORNER | DC_OFFSET |
                        TX_ATTENUATION_DELAY | RX_GAIN_DELAY | FLASH_CAL |
-                       PATH_DELAY | TX_LO_LEAKAGE_INTERNAL | TX_QEC_INIT |
+                       PATH_DELAY | TX_LO_LEAKAGE_INTERNAL | /*TX_QEC_INIT |*/
                        LOOPBACK_RX_LO_DELAY | LOOPBACK_RX_RX_QEC_INIT |
                        RX_LO_DELAY | RX_QEC_INIT |
                        (IS_AD9375(phy) ? DPD_INIT | CLGC_INIT | VSWR_INIT: 0));

            

            I'm sure you have some settings in your devicetree which are causing these issues.
            

            -Michael
            
			
            

		
			
	      

		
		
	
            
	
            
		
            
			
		
            
	
            
	
            
		
						
						
				
						
				
				
		
		
            
			
		
            
	
            

            

            • 

	

          • 
	
            



	
		
	
	



            
	
            
		
            
							
					
            
		
            
			
													0
							
			
				
									
							        
			
			
			
              
            
						
                            
            
            				
            
                on Mar 3, 2022 6:40 AM
            
            
												
						in reply to mhennerich
					
									
              
	
              

		
		
              
					
              



              
    
              
        Fullscreen
        diff.txt
        Download
    
              
    
              diff --git a/drivers/iio/adc/ad9371.c b/drivers/iio/adc/ad9371.c
index 68fef24..930ebbf 100644
--- a/drivers/iio/adc/ad9371.c
+++ b/drivers/iio/adc/ad9371.c
@@ -570,7 +570,8 @@ static int ad9371_init_cal(struct ad9371_rf_phy *phy, uint32_t initCalMask)
 	uint8_t status = 0;
 	mykonosInitCalStatus_t initCalStatus;
 	mykonosErr_t mykError;
-
+	
+	printk("!!!!My Debugger init_call_mask %X\n", initCalMask);
 	/*****************************************************/
 	/*** Mykonos ARM Initialization Calibrations       ***/
 	/*****************************************************/
@@ -661,6 +662,8 @@ static int ad9371_setup(struct ad9371_rf_phy *phy)
 			       TX_ATTENUATION_DELAY | RX_GAIN_DELAY | FLASH_CAL |
 			       PATH_DELAY | LOOPBACK_RX_LO_DELAY | LOOPBACK_RX_RX_QEC_INIT |
 			       RX_LO_DELAY;
+	
+	printk("My Debugger init_call_mask %X\n", initCalMask);
 
 	if (has_rx_and_en(phy))
 		phy->tracking_cal_mask |= TRACK_RX1_QEC | TRACK_RX2_QEC;
@@ -891,8 +894,9 @@ static int ad9371_setup(struct ad9371_rf_phy *phy)
 	/*****************************************************/
 	/*** Mykonos ARM Initialization Calibrations       ***/
 	/*****************************************************/
-
+	printk("My Debugger init_call_mask %X\n", initCalMask);
 	ret = ad9371_init_cal(phy, initCalMask);
+	printk("My Debugger init_call_mask %X\n", initCalMask);
 	if (ret != MYKONOS_ERR_OK) {
 		dev_err(&phy->spi->dev, "%s (%d)",
 			getMykonosErrorMessage(ret), ret);
@@ -1203,7 +1207,7 @@ static ssize_t ad9371_phy_store(struct device *dev,
 				phy->cal_mask &= ~val;
 		} else if (enable) {
 			ad9371_set_radio_state(phy, RADIO_FORCE_OFF);
-
+				
 			ret  = ad9371_init_cal(phy, phy->cal_mask);
 			if (ret != MYKONOS_ERR_OK) {
 				dev_err(&phy->spi->dev, "%s (%d)",
@@ -3013,7 +3017,7 @@ static struct ad9371_phy_platform_data
 	AD9371_OF_PROP("adi,default-initial-calibrations-mask", &phy->init_cal_mask,
 			TX_BB_FILTER | ADC_TUNER | TIA_3DB_CORNER | DC_OFFSET |
 			TX_ATTENUATION_DELAY | RX_GAIN_DELAY | FLASH_CAL |
-			PATH_DELAY | TX_LO_LEAKAGE_INTERNAL | TX_QEC_INIT |
+			PATH_DELAY | TX_LO_LEAKAGE_INTERNAL | /*TX_QEC_INIT |*/
 			LOOPBACK_RX_LO_DELAY | LOOPBACK_RX_RX_QEC_INIT |
 			RX_LO_DELAY | RX_QEC_INIT |
 			(IS_AD9375(phy) ? DPD_INIT | CLGC_INIT | VSWR_INIT: 0));
@@ -4414,8 +4418,9 @@ static int ad9371_jesd204_setup_stage1(struct jesd204_dev *jdev,
 			       TX_ATTENUATION_DELAY | RX_GAIN_DELAY | FLASH_CAL |
 			       PATH_DELAY | LOOPBACK_RX_LO_DELAY | LOOPBACK_RX_RX_QEC_INIT |
 			       RX_LO_DELAY;
-
+	printk("My Debugger init_call_mask %X\n", phy->init_cal_mask);
 	ret = ad9371_init_cal(phy, phy->init_cal_mask);
+	printk("My Debugger init_call_mask %X\n", phy->init_cal_mask);
 	if (ret != MYKONOS_ERR_OK) {
 		dev_err(&phy->spi->dev, "%s (%d)",
 			getMykonosErrorMessage(ret), ret);

              

              


              
			
              

		
			
	      

		
		
	
              
	
              
		
              
			
		
              
	
              
	
              
		
						
						
				
						
				
				
		
		
              
			
		
              
	
              

              

              • 

	

            • 
	
              



	
		
	
	



              
	
              
		
              
							
					
              
		
              
			
													0
							
			
				
									
							        
			
			
			
              •  Analog Employees  
              
            
						
                            
            
            				
            
                on Mar 3, 2022 6:45 AM
            
            
												
						in reply to bobrik_744
					
									
              
	
              

		
		
              
					
              You don't have any modifications in your devicetree?
              

              I don't see any errors/issues on my side.
              

              Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 5.10.0-19304-g4ed3b3ab1edb (michael@mhenneri-D06) (arm-linux-gnueabihf-gcc (GCC) 8.2.0, GNU ld (Linaro_Binutils-) 2.31) #2961 SMP PREEMPT Thu Mar 3 12:47:11 CET 2022
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: Xilinx Zynq ZC706
OF: fdt: earlycon: stdout-path /amba@0/uart@E0001000 not found
Memory policy: Data cache writealloc
cma: Reserved 128 MiB at 0x38000000
Zone ranges:
  Normal   [mem 0x0000000000000000-0x000000002fffffff]
  HighMem  [mem 0x0000000030000000-0x000000003fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x000000003fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
percpu: Embedded 15 pages/cpu s29900 r8192 d23348 u61440
Built 1 zonelists, mobility grouping on.  Total pages: 260608
Kernel command line: console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlycon rootfstype=ext4 rootwait clk_ignore_unused cpuidle.off=1
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 887372K/1048576K available (10240K kernel code, 774K rwdata, 7304K rodata, 1024K init, 170K bss, 30132K reserved, 131072K cma-reserved, 131072K highmem)
rcu: Preemptible hierarchical RCU implementation.
rcu:    RCU event tracing is enabled.
rcu:    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
        Trampoline variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
efuse mapped to (ptrval)
slcr mapped to (ptrval)
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
random: get_random_bytes called from start_kernel+0x340/0x4cc with crng_init=0
zynq_clock_init: clkc starts at (ptrval)
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
timer #0 at (ptrval), irq=25
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
CPU: Testing write buffer coherency: ok
CPU0: Spectre v2: using BPIALL workaround
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100060
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU1: Spectre v2: using BPIALL workaround
smp: Brought up 1 node, 2 CPUs
SMP: Total of 2 processors activated (1333.33 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
thermal_sys: Registered thermal governor 'step_wise'
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval)
e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 33, base_baud = 3125000) is a xuartps
printk: console [ttyPS0] enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
jesd204: created con: id=0, topo=0, link=0, /axi/spi@e0006000/ad9528-1@0 <-> /fpga-axi@0/axi-adxcvr-tx@44a80000
jesd204: created con: id=1, topo=0, link=2, /axi/spi@e0006000/ad9528-1@0 <-> /fpga-axi@0/axi-adxcvr-rx-os@44a50000
jesd204: created con: id=2, topo=0, link=1, /axi/spi@e0006000/ad9528-1@0 <-> /fpga-axi@0/axi-adxcvr-rx@44a60000
jesd204: created con: id=3, topo=0, link=2, /fpga-axi@0/axi-adxcvr-rx-os@44a50000 <-> /fpga-axi@0/axi-jesd204-rx@44ab0000
jesd204: created con: id=4, topo=0, link=0, /fpga-axi@0/axi-adxcvr-tx@44a80000 <-> /fpga-axi@0/axi-jesd204-tx@44a90000
jesd204: created con: id=5, topo=0, link=1, /fpga-axi@0/axi-adxcvr-rx@44a60000 <-> /fpga-axi@0/axi-jesd204-rx@44aa0000
jesd204: created con: id=6, topo=0, link=0, /fpga-axi@0/axi-jesd204-tx@44a90000 <-> /fpga-axi@0/axi-ad9371-tx-hpc@44a04000
jesd204: created con: id=7, topo=0, link=1, /fpga-axi@0/axi-jesd204-rx@44aa0000 <-> /axi/spi@e0006000/ad9371-phy@1
jesd204: created con: id=8, topo=0, link=2, /fpga-axi@0/axi-jesd204-rx@44ab0000 <-> /axi/spi@e0006000/ad9371-phy@1
jesd204: created con: id=9, topo=0, link=0, /fpga-axi@0/axi-ad9371-tx-hpc@44a04000 <-> /axi/spi@e0006000/ad9371-phy@1
jesd204: /axi/spi@e0006000/ad9371-phy@1: JESD204[0] transition uninitialized -> initialized
jesd204: /axi/spi@e0006000/ad9371-phy@1: JESD204[1] transition uninitialized -> initialized
jesd204: /axi/spi@e0006000/ad9371-phy@1: JESD204[2] transition uninitialized -> initialized
jesd204: found 9 devices and 1 topologies
FPGA manager framework
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
NET: Registered protocol family 1
hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
workingset: timestamp_bits=30 max_order=18 bucket_order=0
bounce: pool size: 64 pages
io scheduler mq-deadline registered
io scheduler kyber registered
zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.dmac:        DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
brd: module loaded
loop: module loaded
Registered mathworks_ip class
spi-nor spi1.0: found s25fl128s1, expected n25q128a11
random: fast init done
random: crng init done
spi-nor spi1.0: trying to lock already unlocked area
spi-nor spi1.0: s25fl128s1 (32768 Kbytes)
5 fixed-partitions partitions found on MTD device spi1.0
Creating 5 MTD partitions on "spi1.0":
0x000000000000-0x000000500000 : "boot"
0x000000500000-0x000000520000 : "bootenv"
0x000000520000-0x000000540000 : "config"
0x000000540000-0x000000fc0000 : "image"
0x000000fc0000-0x000002000000 : "spare"
MACsec IEEE 802.1AE
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 36 (00:0a:35:00:01:22)
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver upd78f0730
usbserial: USB Serial support registered for upd78f0730
ULPI transceiver vendor/product ID 0x0424/0x0007
Found SMSC USB3320 ULPI transceiver.
ULPI integrity check: passed.
ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.0-19304-g4ed3b3ab1edb ehci_hcd
usb usb1: SerialNumber: ci_hdrc.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
i2c /dev entries driver
si570 1-005d: registered, current frequency 156250000 Hz
i2c i2c-0: Added multiplexed i2c bus 1
adv7511 2-0039: supply avdd not found, using dummy regulator
adv7511 2-0039: supply dvdd not found, using dummy regulator
adv7511 2-0039: supply pvdd not found, using dummy regulator
adv7511 2-0039: supply bgvdd not found, using dummy regulator
adv7511 2-0039: supply dvdd-3v not found, using dummy regulator
i2c i2c-0: Added multiplexed i2c bus 2
at24 3-0054: supply vcc not found, using dummy regulator
at24 3-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
i2c i2c-0: Added multiplexed i2c bus 3
pca953x 4-0021: supply vcc not found, using dummy regulator
pca953x 4-0021: using no AI
i2c i2c-0: Added multiplexed i2c bus 4
rtc-pcf8563 5-0051: registered as rtc0
rtc-pcf8563 5-0051: setting system clock to 2022-03-03T11:48:01 UTC (1646308081)
i2c i2c-0: Added multiplexed i2c bus 5
at24 6-0050: supply vcc not found, using dummy regulator
at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
i2c i2c-0: Added multiplexed i2c bus 6
i2c i2c-0: Added multiplexed i2c bus 7
i2c i2c-0: Added multiplexed i2c bus 8
pca954x 0-0074: registered 8 multiplexed busses for I2C switch pca9548
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
gspca_main: v2.14.0 registered
cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s
Xilinx Zynq CpuIdle Driver started
failed to register cpuidle driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ad9371 spi0.1: ad9371_probe : enter
mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA
ad9528 spi0.0: supply vcc not found, using dummy regulator
mmc0: new high speed SDXC card at address aaaa
mmcblk0: mmc0:aaaa SR64G 59.5 GiB 
 mmcblk0: p1 p2 p3
jesd204: /axi/spi@e0006000/ad9528-1@0,jesd204:0,parent=spi0.0: Using as SYSREF provider
axi_adxcvr 44a60000.axi-adxcvr-rx: AXI-ADXCVR-RX (17.01.a) using CPLL on GTX2 at 0x44A60000. Number of lanes: 2.
axi_adxcvr 44a50000.axi-adxcvr-rx-os: AXI-ADXCVR-RX (17.01.a) using CPLL on GTX2 at 0x44A50000. Number of lanes: 2.
axi_adxcvr 44a80000.axi-adxcvr-tx: AXI-ADXCVR-TX (17.01.a) using QPLL on GTX2 at 0x44A80000. Number of lanes: 4.
axi_sysid 45000000.axi-sysid-0: AXI System ID core version (1.00.a) found
axi_sysid 45000000.axi-sysid-0: [adrv9371x] on [zc706] git <43c6ae1ca9faf268f30c7ef489f1428fc30a8b23> clean [2021-06-09 22:31:32] UTC
fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
usbcore: registered new interface driver snd-usb-audio
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 36
Registering SWP/SWPB emulation handler
[drm] Initialized axi_hdmi_drm 1.0.0 20120930 for 70e00000.axi_hdmi on minor 0
axi-hdmi 70e00000.axi_hdmi: [drm] Cannot find any crtc or sizes
ad9371 spi0.1: ad9371_probe : enter
cf_axi_dds 44a04000.axi-ad9371-tx-hpc: Analog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x44A04000 mapped to 0xb5ef0c6f, probed DDS AD9371
axi-jesd204-rx 44aa0000.axi-jesd204-rx: AXI-JESD204-RX (1.04.a) at 0x44AA0000. Encoder 8b10b, width 4/0, lanes 2, jesd204-fsm.
axi-jesd204-rx 44ab0000.axi-jesd204-rx: AXI-JESD204-RX (1.04.a) at 0x44AB0000. Encoder 8b10b, width 4/0, lanes 2, jesd204-fsm.
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition initialized -> probed
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition initialized -> probed
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition initialized -> probed
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition probed -> idle
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition probed -> idle
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition probed -> idle
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> device_init
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> device_init
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> device_init
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> link_init
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> link_init
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> link_init
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> link_supported
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> link_supported
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> link_supported
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_pre_setup
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_pre_setup
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_pre_setup
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> clk_sync_stage1
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> clk_sync_stage1
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> clk_sync_stage1
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> clk_sync_stage2
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> clk_sync_stage2
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> clk_sync_stage2
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage3
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage3
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage3
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> link_setup
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> link_setup
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> link_setup
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> opt_setup_stage1
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> opt_setup_stage1
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> opt_setup_stage1
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage1 -> opt_setup_stage2
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage1 -> opt_setup_stage2
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage1 -> opt_setup_stage2
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage2 -> opt_setup_stage3
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage2 -> opt_setup_stage3
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage2 -> opt_setup_stage3
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage3 -> opt_setup_stage4
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage3 -> opt_setup_stage4
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage3 -> opt_setup_stage4
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage4 -> opt_setup_stage5
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage4 -> opt_setup_stage5
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage4 -> opt_setup_stage5
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage5 -> clocks_enable
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage5 -> clocks_enable
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage5 -> clocks_enable
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clocks_enable -> link_enable
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clocks_enable -> link_enable
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clocks_enable -> link_enable
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_enable -> link_running
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_enable -> link_running
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_enable -> link_running
ad9371 spi0.1: AD9371 Rev 3, Firmware 5.2.2 API version: 1.5.2.3566 successfully initialized via jesd204-fsm
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_running -> opt_post_running_stage
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_running -> opt_post_running_stage
jesd204: /axi/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_running -> opt_post_running_stage
axi-jesd204-tx 44a90000.axi-jesd204-tx: AXI-JESD204-TX (1.03.a) at 0x44A90000. Encoder 8b10b, width 4/0, lanes 4, jesd204-fsm.
cf_axi_adc 44a00000.axi-ad9371-rx-hpc: ADI AIM (10.01.b) at 0x44A00000 mapped to 0xddf25141, probed ADC AD9371 as MASTER
input: gpio_keys as /devices/soc0/gpio_keys/input/input0
clk: Not disabling unused clocks
ALSA device list:
  #0: HDMI monitor
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 1024K
Run /sbin/init as init process
systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2)
systemd[1]: Detected architecture arm.

Welcome to Kuiper GNU/Linux 10 (buster)!

              
			
              

		
			
	      

		
		
	
              
	
              
		
              
			
		
              
	
              
	
              
		
						
						
				
						
				
				
		
		
              
			
		
              
	
              

              

              • 

	

            • 
	
              



	
		
	
	



              
	
              
		
              
							
					
              
		
              
			
													0
							
			
				
									
							        
			
			
			
                
            
						
                            
            
            				
            
                on Mar 3, 2022 6:59 AM
            
            
												
						in reply to mhennerich
					
									
                
	
                

		
		
                
					
                I make manual changes to the devicetree 
                

                



                
    
                
        Fullscreen
        diff_dts.txt
        Download
    
                
    
                199c199
< 					adi,vcxo-freq = <80000000>;
---
> 				adi,vcxo-freq = <0x7530000>;
204,206c204
< 				/*
< 				//adi,pll1-feedback-div = <0x4>;
< 
---
> 				adi,pll1-feedback-div = <0x4>;
208,210d205
< 				*/
< 				adi,pll2-m1-frequency = <1280000000>;
< 				/*
214d208
< 				*/
238c232
< 					adi,channel-divider = <16>;
---
> 					adi,channel-divider = <0xa>;
247c241
< 					adi,channel-divider = <16>;
---
> 					adi,channel-divider = <0xa>;
256c250
< 					adi,channel-divider = <16>;
---
> 					adi,channel-divider = <0xa>;
265c259
< 					adi,channel-divider = <16>;
---
> 					adi,channel-divider = <0xa>;
278,281c272,275
< 				adi,clocks-clk-pll-vco-freq_khz = <9600000>;
< 				adi,clocks-device-clock_khz = <80000>;
< 				adi,clocks-clk-pll-hs-div = <4>;
< 				adi,clocks-clk-pll-vco-div = <3>;
---
> 				adi,clocks-clk-pll-vco-freq_khz = <0x960000>;
> 				adi,clocks-device-clock_khz = <0x1e000>;
> 				adi,clocks-clk-pll-hs-div = <0x4>;
> 				adi,clocks-clk-pll-vco-div = <0x2>;
283,342c277,322
< 
< 				adi,rx-profile-adc-div = <1>;
< 				adi,rx-profile-rx-fir-decimation = <4>;
< 				adi,rx-profile-rx-dec5-decimation = <5>;				
< 				adi,rx-profile-en-high-rej-dec5 = <1>;			
< 				adi,rx-profile-rhb1-decimation = <2>;
< 				adi,rx-profile-iq-rate_khz = <40000>;
< 				adi,rx-profile-rf-bandwidth_hz = <20000000>;
< 				adi,rx-profile-rx-bbf-3db-corner_khz = <20000>;
< 				
< 				adi,obs-settings-obs-rx-channels-enable = <3>; /* Disable Sniffer Profile */
< 				
< 				adi,rx-profile-rx-fir-gain_db = <(-6)>;
< 				adi,rx-profile-rx-fir-num-fir-coefs = <72>;
< 				adi,rx-profile-rx-fir-coefs = < (-1) (-1) (0) (3) (5) (4) (0) (-7) (-9) (-4) (4) (6) (-7) (-28) (-32) (9) (92) (168) (147) (-30) (-324) (-562) (-507) (-17) (781) (1457) (1442) (382) (-1524) (-3406) (-4000) (-2241) (2096) (8083) (13870) (17424) (17424) (13870) (8083) (2096) (-2241) (-4000) (-3406) (-1524) (382) (1442) (1457) (781) (-17) (-507) (-562) (-324) (-30) (147) (168) (92) (9) (-32) (-28) (-7) (6) (4) (-4) (-9) (-7) (0) (4) (5) (3) (0) (-1) (-1)>;
< 				adi,rx-profile-custom-adc-profile = <(460) (273) (182) (98) (1280) (112) (1505) (53) (1574) (25) (1069) (40) (48) (48) (31) (184)>;
< 				adi,obs-profile-adc-div = <1>;
< 				adi,obs-profile-rx-fir-decimation = <2>;
< 				adi,obs-profile-rx-dec5-decimation = <5>;
< 				adi,obs-profile-en-high-rej-dec5 = <1>;
< 				adi,obs-profile-rhb1-decimation = <2>;				
< 				adi,obs-profile-iq-rate_khz = <80000>;
< 				adi,obs-profile-rf-bandwidth_hz = <60000000>;
< 				adi,obs-profile-rx-bbf-3db-corner_khz = <30000>;
< 				
< 				
< 				adi,obs-profile-rx-fir-gain_db = <0>;
< 				adi,obs-profile-rx-fir-num-fir-coefs = <72>;
< 				adi,obs-profile-rx-fir-coefs = <(-1) (-1) (0) (3) (5) (4) (0) (-7) (-9) (-4) (4) (6) (-7) (-28) (-32) (9) (92) (168) (147) (-30) (-324) (-562) (-507) (-17) (781) (1457) (1442) (382) (-1524) (-3406) (-4000) (-2241) (2096) (8083) (13870) (17424) (17424) (13870) (8083) (2096) (-2241) (-4000) (-3406) (-1524) (382) (1442) (1457) (781) (-17) (-507) (-562) (-324) (-30) (147) (168) (92) (9) (-32) (-28) (-7) (6) (4) (-4) (-9) (-7) (0) (4) (5) (3) (0) (-1) (-1)>;
< 				adi,obs-profile-custom-adc-profile = <(460) (273) (182) (98) (1280) (112) (1505) (53) (1574) (25) (1069) (40) (48) (48) (31) (184)>;
< 				adi,obs-settings-custom-loopback-adc-profile = <(460) (273) (182) (98) (1280) (112) (1505) (53) (1574) (25) (1069) (40) (48) (48) (31) (184)>;
< 				
< 				adi,tx-profile-dac-div = <1>;
< 				
< 				adi,tx-profile-tx-fir-interpolation = <2>;
< 				adi,tx-profile-thb1-interpolation = <2>;
< 				adi,tx-profile-thb2-interpolation = <2>;
< 				adi,tx-profile-tx-input-hb-interpolation = <1>;	
< 				adi,tx-profile-iq-rate_khz = <80000>;	
< 				adi,tx-profile-primary-sig-bandwidth_hz = <20000000>;	
< 				adi,tx-profile-rf-bandwidth_hz = <60000000>;	
< 				adi,tx-profile-tx-dac-3db-corner_khz = <92000>;				
< 				adi,tx-profile-tx-bbf-3db-corner_khz = <30000>;
< 	
< 				
< 				adi,tx-profile-tx-fir-gain_db = <0>;
< 				adi,tx-profile-tx-fir-num-fir-coefs = <32>;
< 				adi,tx-profile-tx-fir-coefs = <(-42) (-49) (135) (153) (-313) (-386) (619) (819) (-1108) (-1646) (1799) (3288) (-2375) (-6142) (3518) (18087) (18087) (3518) (-6142) (-2375) (3288) (1799) (-1646) (-1108) (819) (619) (-386) (-313) (153) (135) (-49) (-42)>;
< 
< 				adi,sniffer-profile-adc-div = <1>;
< 				adi,sniffer-profile-en-high-rej-dec5 = <1>;
< 				adi,sniffer-profile-iq-rate_khz = <40000>;
< 				adi,sniffer-profile-rf-bandwidth_hz = <20000000>;
< 				adi,sniffer-profile-rhb1-decimation = <2>;
< 				adi,sniffer-profile-rx-bbf-3db-corner_khz = <20000>;
< 				adi,sniffer-profile-rx-dec5-decimation = <5>;
< 				adi,sniffer-profile-rx-fir-decimation = <4>;		
< 				/*adi,sniffer-profile-custom-adc-profile
< 				adi,sniffer-profile-rx-fir*/
< 				
---
> 				adi,rx-profile-adc-div = <0x1>;
> 				adi,rx-profile-en-high-rej-dec5 = <0x1>;
> 				adi,rx-profile-iq-rate_khz = <0x1e000>;
> 				adi,rx-profile-rf-bandwidth_hz = <0x5f5e100>;
> 				adi,rx-profile-rhb1-decimation = <0x1>;
> 				adi,rx-profile-rx-bbf-3db-corner_khz = <0x186a0>;
> 				adi,rx-profile-rx-dec5-decimation = <0x5>;
> 				adi,rx-profile-rx-fir-decimation = <0x2>;
> 				adi,rx-profile-rx-fir-gain_db = <0xfffffffa>;
> 				adi,rx-profile-rx-fir-num-fir-coefs = <0x30>;
> 				adi,rx-profile-rx-fir-coefs = <0xfffbffe6 0x200033 0xffbdff8c 0x8c00d4 0xff04fe91 0x1ad0253 0xfd50fc5d 0x4300593 0xf98ef774 0xa340da8 0xed3ee259 0x25b87e3d 0x7e3d25b8 0xe259ed3e 0xda80a34 0xf774f98e 0x5930430 0xfc5dfd50 0x25301ad 0xfe91ff04 0xd4008c 0xff8cffbd 0x330020 0xffe6fffb>;
> 				adi,rx-profile-custom-adc-profile = <0x2160182 0xc90062 0x50001eb 0x6370117 0x51a0068 0x318001c 0x300027 0x1700bb>;
> 				adi,obs-profile-adc-div = <0x1>;
> 				adi,obs-profile-en-high-rej-dec5 = <0x1>;
> 				adi,obs-profile-iq-rate_khz = <0x3c000>;
> 				adi,obs-profile-rf-bandwidth_hz = <0xbebc200>;
> 				adi,obs-profile-rhb1-decimation = <0x1>;
> 				adi,obs-profile-rx-bbf-3db-corner_khz = <0x186a0>;
> 				adi,obs-profile-rx-dec5-decimation = <0x5>;
> 				adi,obs-profile-rx-fir-decimation = <0x1>;
> 				adi,obs-profile-rx-fir-gain_db = <0x6>;
> 				adi,obs-profile-rx-fir-num-fir-coefs = <0x18>;
> 				adi,obs-profile-rx-fir-coefs = <0xfedf0051 0xffe9ffaa 0xe5fe9e 0x18dff17 0xfd6f06a3 0xefb459e2 0xefb406a3 0xfd6fff17 0x18dfe9e 0xe5ffaa 0xffe90051 0xfedf0000>;
> 				adi,obs-profile-custom-adc-profile = <0x1c2015d 0xc90062 0x50002da 0x65a0332 0x5c402dc 0x3420014 0x290024 0x1800c8>;
> 				adi,obs-settings-custom-loopback-adc-profile = <0x2390171 0xc90062 0x5000123 0x6050095 0x528003a 0x3270022 0x300028 0x1700bd>;
> 				adi,tx-profile-dac-div = <0x1>;
> 				adi,tx-profile-iq-rate_khz = <0x3c000>;
> 				adi,tx-profile-primary-sig-bandwidth_hz = <0x47868c0>;
> 				adi,tx-profile-rf-bandwidth_hz = <0xbebc200>;
> 				adi,tx-profile-thb1-interpolation = <0x2>;
> 				adi,tx-profile-thb2-interpolation = <0x1>;
> 				adi,tx-profile-tx-bbf-3db-corner_khz = <0x186a0>;
> 				adi,tx-profile-tx-dac-3db-corner_khz = <0x2da78>;
> 				adi,tx-profile-tx-fir-interpolation = <0x1>;
> 				adi,tx-profile-tx-input-hb-interpolation = <0x1>;
> 				adi,tx-profile-tx-fir-gain_db = <0x6>;
> 				adi,tx-profile-tx-fir-num-fir-coefs = <0x10>;
> 				adi,tx-profile-tx-fir-coefs = <0x6fef2 0xcbff58 0xffac03d7 0xf36a5297 0xf36a03d7 0xffacff58 0xcbfef2 0x60000>;
> 				adi,sniffer-profile-adc-div = <0x1>;
> 				adi,sniffer-profile-en-high-rej-dec5 = <0x0>;
> 				adi,sniffer-profile-iq-rate_khz = <0x7800>;
> 				adi,sniffer-profile-rf-bandwidth_hz = <0x1312d00>;
> 				adi,sniffer-profile-rhb1-decimation = <0x2>;
> 				adi,sniffer-profile-rx-bbf-3db-corner_khz = <0x186a0>;
> 				adi,sniffer-profile-rx-dec5-decimation = <0x5>;
> 				adi,sniffer-profile-rx-fir-decimation = <0x4>;

                

                


                
			
                

		
			
	      

		
		
	
                
	
                
		
                
			
		
                
	
                
	
                
		
						
						
				
						
				
				
		
		
                
			
		
                
	
                

                

                • 

	

              • 
	
                



	
		
	
	



                
	
                
		
                
							
					
                
		
                
			
													0
							
			
				
									
							        
			
			
			
                  
            
						
                            
            
            				
            
                on Mar 4, 2022 4:31 AM
            
            
												
						in reply to mhennerich
					
									
                  
	
                  

		
		
                  
					
                  what am I doing wrong with my device tree?
                  
			
                  

		
			
	      

		
		
	
                  
	
                  
		
                  
			
		
                  
	
                  
	
                  
		
						
						
				
						
				
				
		
		
                  
			
		
                  
	
                  

                  

                  • 

	

                • 
	
                  



	
		
	
	



                  
	
                  
		
                  
							
					
                  
		
                  
			
													0
							
			
				
									
							        
			
			
			
                  •  Analog Employees  
                  
            
						
                            
            
            				
            
                on Mar 4, 2022 4:37 AM
            
            
												
						in reply to bobrik_744
					
									
                  
	
                  

		
		
                  
					
                  Can you please add your modifications, into this file and then provide a git diff.
                  

                  https://github.com/analogdevicesinc/linux/blob/master/arch/arm/boot/dts/adi-adrv9371.dtsi
                  

                  Please also provide your filter wizard profile.
                  

                  -Michael
                  
			
                  

		
			
	      

		
		
	
                  
	
                  
		
                  
			
		
                  
	
                  
	
                  
		
						
						
				
						
				
				
		
		
                  
			
		
                  
	
                  

                  

                  • 

	

                • 
	
                  



	
		
	
	



                  
	
                  
		
                  
							
					
                  
		
                  
			
													0
							
			
				
									
							        
			
			
			
                    
            
						
                            
            
            				
            
                on Mar 4, 2022 5:27 AM
            
            
												
						in reply to mhennerich
					
									
                    
	
                    

		
		
                    
					
                    



                    
    
                    
        Fullscreen
        diff_dtsi.txt
        Download
    
                    
    
                    19c19
< 		adi,vcxo-freq = <80000000>;
---
> 		adi,vcxo-freq = <122880000>;
27,28c27,28
< 		//adi,pll1-feedback-div = <4>;
< 		//adi,pll1-charge-pump-current-nA = <5000>;
---
> 		adi,pll1-feedback-div = <4>;
> 		adi,pll1-charge-pump-current-nA = <5000>;
32,35c32,34
< 		//adi,pll2-vco-div-m1 = <3>; /* use 5 for 184320000 output device clock */
< 		//adi,pll2-n2-div = <10>; /* N / M1 */
< 		//adi,pll2-r1-div = <1>;
< 		adi,pll2-m1-frequency = <1280000000>;
---
> 		adi,pll2-vco-div-m1 = <3>; /* use 5 for 184320000 output device clock */
> 		adi,pll2-n2-div = <10>; /* N / M1 */
> 		adi,pll2-r1-div = <1>;
58c57
< 			adi,channel-divider = <16>;
---
> 			adi,channel-divider = <10>;
67c66
< 			adi,channel-divider = <16>;
---
> 			adi,channel-divider = <10>;
76c75
< 			adi,channel-divider = <16>;
---
> 			adi,channel-divider = <10>;
85c84
< 			adi,channel-divider = <16>;
---
> 			adi,channel-divider = <10>;
110,111c109,110
< 		adi,clocks-clk-pll-vco-freq_khz = <9600000>;
< 		adi,clocks-device-clock_khz = <80000>;
---
> 		adi,clocks-clk-pll-vco-freq_khz = <9830400>;
> 		adi,clocks-device-clock_khz = <122880>;
113c112
< 		adi,clocks-clk-pll-vco-div = <3>;
---
> 		adi,clocks-clk-pll-vco-div = <2>;
119,122c118,121
< 		adi,rx-profile-iq-rate_khz = <40000>;
< 		adi,rx-profile-rf-bandwidth_hz = <20000000>;
< 		adi,rx-profile-rhb1-decimation = <2>;
< 		adi,rx-profile-rx-bbf-3db-corner_khz = <20000>;
---
> 		adi,rx-profile-iq-rate_khz = <122880>;
> 		adi,rx-profile-rf-bandwidth_hz = <100000000>;
> 		adi,rx-profile-rhb1-decimation = <1>;
> 		adi,rx-profile-rx-bbf-3db-corner_khz = <100000>;
124,126c123
< 		adi,rx-profile-rx-fir-decimation = <4>;
< 
< 		adi,obs-settings-obs-rx-channels-enable = <3>; /* Disable Sniffer Profile */
---
> 		adi,rx-profile-rx-fir-decimation = <2>;
129,132c126,129
< 		adi,rx-profile-rx-fir-num-fir-coefs = <72>;
< 		adi,rx-profile-rx-fir-coefs = /bits/ 16 <(-1) (-1) (0) (3) (5) (4) (0) (-7) (-9) (-4) (4) (6) (-7) (-28) (-32) (9) (92) (168) (147) (-30) (-324) (-562) (-507) (-17) (781) (1457) (1442) (382) (-1524) (-3406) (-4000) (-2241) (2096) (8083) (13870) (17424) (17424) (13870) (8083) (2096) (-2241) (-4000) (-3406) (-1524) (382) (1442) (1457) (781) (-17) (-507) (-562) (-324) (-30) (147) (168) (92) (9) (-32) (-28) (-7) (6) (4) (-4) (-9) (-7) (0) (4) (5) (3) (0) (-1) (-1)>;
< 				
< 		adi,rx-profile-custom-adc-profile = /bits/ 16  <(460) (273) (182) (98) (1280) (112) (1505) (53) (1574) (25) (1069) (40) (48) (48) (31) (184)>;
---
> 		adi,rx-profile-rx-fir-num-fir-coefs = <48>;
> 		adi,rx-profile-rx-fir-coefs = /bits/ 16 <(-5) (-26) (32) (51) (-67) (-116) (140) (212) (-252) (-367) (429) (595) (-688) (-931) (1072) (1427) (-1650) (-2188) (2612) (3496) (-4802) (-7591) (9656) (32317) (32317) (9656) (-7591) (-4802) (3496) (2612) (-2188) (-1650) (1427) (1072) (-931) (-688) (595) (429) (-367) (-252) (212) (140) (-116) (-67) (51) (32) (-26) (-5)>;
> 
> 		adi,rx-profile-custom-adc-profile = /bits/ 16  <534 386 201 98 1280 491 1591 279 1306 104 792 28 48 39 23 187>;
136,139c133,136
< 		adi,obs-profile-iq-rate_khz = <80000>;
< 		adi,obs-profile-rf-bandwidth_hz = <60000000>;
< 		adi,obs-profile-rhb1-decimation = <2>;
< 		adi,obs-profile-rx-bbf-3db-corner_khz = <30000>;
---
> 		adi,obs-profile-iq-rate_khz = <245760>;
> 		adi,obs-profile-rf-bandwidth_hz = <200000000>;
> 		adi,obs-profile-rhb1-decimation = <1>;
> 		adi,obs-profile-rx-bbf-3db-corner_khz = <100000>;
141c138
< 		adi,obs-profile-rx-fir-decimation = <2>;
---
> 		adi,obs-profile-rx-fir-decimation = <1>;
143,145c140,142
< 		adi,obs-profile-rx-fir-gain_db = <0>;
< 		adi,obs-profile-rx-fir-num-fir-coefs = <72>;
< 		adi,obs-profile-rx-fir-coefs = /bits/ 16 <(0) (1) (-1) (-2) (2) (6) (-4) (-14) (5) (30) (-3) (-56) (-8) (93) (36) (-143) (-92) (202) (189) (-260) (-343) (301) (571) (-300) (-889) (216) (1320) (13) (-1905) (-508) (2731) (1576) (-4111) (-4817) (5434) (17585) (17585) (5434) (-4817) (-4111) (1576) (2731) (-508) (-1905) (13) (1320) (216) (-889) (-300) (571) (301) (-343) (-260) (189) (202) (-92) (-143) (36) (93) (-8) (-56) (-3) (30) (5) (-14) (-4) (6) (2) (-2) (-1) (1) (0)>;
---
> 		adi,obs-profile-rx-fir-gain_db = <6>;
> 		adi,obs-profile-rx-fir-num-fir-coefs = <24>;
> 		adi,obs-profile-rx-fir-coefs = /bits/ 16 <(-289) (81) (-23) (-86) (229) (-354) (397) (-233) (-657) (1699) (-4172) (23010) (-4172) (1699) (-657) (-233) (397) (-354) (229) (-86) (-23) (81) (-289) (0)>;
147,148c144,145
< 		adi,obs-profile-custom-adc-profile = /bits/ 16  <(459) (273) (182) (98) (1280) (115) (1506) (54) (1575) (25) (1069) (40) (48) (48) (31) (184)>;
< 		adi,obs-settings-custom-loopback-adc-profile = /bits/ 16  <(460) (273) (182) (98) (1280) (112) (1505) (53) (1574) (25) (1069) (40) (48) (48) (31) (184)>;
---
> 		adi,obs-profile-custom-adc-profile = /bits/ 16  <450 349 201 98 1280 730 1626 818 1476 732 834 20 41 36 24 200>;
> 		adi,obs-settings-custom-loopback-adc-profile = /bits/ 16  <569 369 201 98 1280 291 1541 149 1320 58 807 34 48 40 23 189>;
151,153c148,150
< 		adi,tx-profile-iq-rate_khz = <80000>;
< 		adi,tx-profile-primary-sig-bandwidth_hz = <20000000>;
< 		adi,tx-profile-rf-bandwidth_hz = <60000000>;
---
> 		adi,tx-profile-iq-rate_khz = <245760>;
> 		adi,tx-profile-primary-sig-bandwidth_hz = <75000000>;
> 		adi,tx-profile-rf-bandwidth_hz = <200000000>;
155,158c152,155
< 		adi,tx-profile-thb2-interpolation = <2>;
< 		adi,tx-profile-tx-bbf-3db-corner_khz = <30000>;
< 		adi,tx-profile-tx-dac-3db-corner_khz = <92000>;
< 		adi,tx-profile-tx-fir-interpolation = <2>;
---
> 		adi,tx-profile-thb2-interpolation = <1>;
> 		adi,tx-profile-tx-bbf-3db-corner_khz = <100000>;
> 		adi,tx-profile-tx-dac-3db-corner_khz = <187000>;
> 		adi,tx-profile-tx-fir-interpolation = <1>;
161,164c158,161
< 		adi,tx-profile-tx-fir-gain_db = <0>;
< 		adi,tx-profile-tx-fir-num-fir-coefs = <32>;
< 		adi,tx-profile-tx-fir-coefs = /bits/ 16 <(-42) (-49) (135) (153) (-313) (-386) (619) (819) (-1108) (-1646) (1799) (3288) (-2375) (-6142) (3518) (18087) (18087) (3518) (-6142) (-2375) (3288) (1799) (-1646) (-1108) (819) (619) (-386) (-313) (153) (135) (-49) (-42)>;
< 		/*
---
> 		adi,tx-profile-tx-fir-gain_db = <6>;
> 		adi,tx-profile-tx-fir-num-fir-coefs = <16>;
> 		adi,tx-profile-tx-fir-coefs = /bits/ 16 <(6) (-270) (203) (-168) (-84) (983) (-3222) (21143) (-3222) (983) (-84) (-168) (203) (-270) (6) (0)>;
> 
167c164
< 		adi,sniffer-profile-iq-rate_khz = <40000>;
---
> 		adi,sniffer-profile-iq-rate_khz = <30720>;
173d169
< 		*/

                    

                    





                    
    
                    
        Fullscreen
        7356.profile.txt
        Download
    
                    
    
                    <profile AD9371 version=0 name=Rx 20, IQrate 40.000>
 <clocks>
  <deviceClock_kHz=80000>
  <clkPllVcoFreq_kHz=9600000>
  <clkPllVcoDiv=1.5>
  <clkPllHsDiv=4>
 </clocks>

 <rx>
  <adcDiv=1>
  <rxFirDecimation=4>
  <rxDec5Decimation=5>
  <enHighRejDec5=1>
  <rhb1Decimation=2>
  <iqRate_kHz=40000>
  <rfBandwidth_Hz=20000000>
  <rxBbf3dBCorner_kHz=20000>

  <filter FIR gain=-6 num=72>
  -1
  -1
  0
  3
  5
  4
  0
  -7
  -9
  -4
  4
  6
  -7
  -28
  -32
  9
  92
  168
  147
  -30
  -324
  -562
  -507
  -17
  781
  1457
  1442
  382
  -1524
  -3406
  -4000
  -2241
  2096
  8083
  13870
  17424
  17424
  13870
  8083
  2096
  -2241
  -4000
  -3406
  -1524
  382
  1442
  1457
  781
  -17
  -507
  -562
  -324
  -30
  147
  168
  92
  9
  -32
  -28
  -7
  6
  4
  -4
  -9
  -7
  0
  4
  5
  3
  0
  -1
  -1
  </filter>

  <adc-profile num=16>
  460
  273
  182
  98
  1280
  112
  1505
  53
  1574
  25
  1069
  40
  48
  48
  31
  184
  </adc-profile>
 </rx>

 <obs>
  <adcDiv=1>
  <rxFirDecimation=2>
  <rxDec5Decimation=5>
  <enHighRejDec5=1>
  <rhb1Decimation=2>
  <iqRate_kHz=80000>
  <rfBandwidth_Hz=60000000>
  <rxBbf3dBCorner_kHz=30000>

  <filter FIR gain=0 num=72>
  0
  1
  -1
  -2
  2
  6
  -4
  -14
  5
  30
  -3
  -56
  -8
  93
  36
  -143
  -92
  202
  189
  -260
  -343
  301
  571
  -300
  -889
  216
  1320
  13
  -1905
  -508
  2731
  1576
  -4111
  -4817
  5434
  17585
  17585
  5434
  -4817
  -4111
  1576
  2731
  -508
  -1905
  13
  1320
  216
  -889
  -300
  571
  301
  -343
  -260
  189
  202
  -92
  -143
  36
  93
  -8
  -56
  -3
  30
  5
  -14
  -4
  6
  2
  -2
  -1
  1
  0
  </filter>

  <adc-profile num=16>
  459
  273
  182
  98
  1280
  115
  1506
  54
  1575
  25
  1069
  40
  48
  48
  31
  184
  </adc-profile>

  <lpbk-adc-profile num=16>
  460
  273
  182
  98
  1280
  112
  1505
  53
  1574
  25
  1069
  40
  48
  48
  31
  184
  </lpbk-adc-profile>
 </obs>

 <sniffer>
  <adcDiv=1>
  <rxFirDecimation=4>
  <rxDec5Decimation=5>
  <enHighRejDec5=1>
  <rhb1Decimation=2>
  <iqRate_kHz=40000>
  <rfBandwidth_Hz=20000000>
  <rxBbf3dBCorner_kHz=20000>

  <filter FIR gain=-6 num=72>
  -1
  -1
  0
  3
  5
  4
  0
  -7
  -9
  -4
  4
  6
  -7
  -28
  -32
  9
  92
  168
  147
  -30
  -324
  -562
  -507
  -17
  781
  1457
  1442
  382
  -1524
  -3406
  -4000
  -2241
  2096
  8083
  13870
  17424
  17424
  13870
  8083
  2096
  -2241
  -4000
  -3406
  -1524
  382
  1442
  1457
  781
  -17
  -507
  -562
  -324
  -30
  147
  168
  92
  9
  -32
  -28
  -7
  6
  4
  -4
  -9
  -7
  0
  4
  5
  3
  0
  -1
  -1
  </filter>

  <adc-profile num=16>
  460
  273
  182
  98
  1280
  112
  1505
  53
  1574
  25
  1069
  40
  48
  48
  31
  184
  </adc-profile>
 </sniffer>

 <tx>
  <dacDiv=2.5>
  <txFirInterpolation=2>
  <thb1Interpolation=2>
  <thb2Interpolation=2>
  <txInputHbInterpolation=1>
  <iqRate_kHz=80000>
  <primarySigBandwidth_Hz=20000000>
  <rfBandwidth_Hz=60000000>
  <txDac3dBCorner_kHz=92000>
  <txBbf3dBCorner_kHz=30000>

  <filter FIR gain=0 num=32>
  -42
  -49
  135
  153
  -313
  -386
  619
  819
  -1108
  -1646
  1799
  3288
  -2375
  -6142
  3518
  18087
  18087
  3518
  -6142
  -2375
  3288
  1799
  -1646
  -1108
  819
  619
  -386
  -313
  153
  135
  -49
  -42
  </filter>
 </tx>
</profile>

                    

                    


                    
			
                    

		
			
	      

		
		
	
                    
	
                    
		
                    
			
		
                    
	
                    
	
                    
		
						
						
				
						
				
				
		
		
                    
			
		
                    
	
                    

                    

                    • 

	

                  • 
	
                    



	
		
	
	



                    
	
                    
		
                    
							
					
                    
		
                    
			
													0
							
			
				
									
							        
			
			
			
                    •  Analog Employees  
                    
            
						
                            
            
            				
            
                on Mar 4, 2022 5:51 AM
            
            
												
						in reply to bobrik_744
					
									
                    
	
                    

		
		
                    
					
                      <clkPllVcoDiv=1.5>
                    

                    /**
                     * \brief Enum of possible VCO divider settings (1x, 1.5x, 2x, 3x)
                     */
                    typedef enum
                    {
                     VCODIV_1 = 0,
                     VCODIV_1p5 = 1,
                     VCODIV_2 = 2,
                     VCODIV_3 = 3
                    } mykonosVcoDiv_t;
                    

                    According to this you need to use:
                    

                    adi,clocks-clk-pll-vco-div = <1>; 
                    

                    -Michael
                    
			
                    

		
			
	      

		
		
	
                    
	
                    
		
                    
			
		
                    
	
                    
	
                    
		
						
						
				
						
				
				
		
		
                    
			
		
                    
	
                    

                    

                    • 

	
                  



Reply



Children
	
                    
	

                  • 
	

                    • 

	

                  • 
	
                    



	
		
	
	



                    
	
                    
		
                    
							
					
                    
		
                    
			
													0
							
			
				
									
							        
			
			
			
                      
            
						
                            
            
            				
            
                on Mar 4, 2022 6:03 AM
            
            
												
						in reply to mhennerich
					
									
                      
	
                      

		
		
                      
					
                      The forum has already written that the GUI is incorrect value adi, clocks-clk-pll-vco-div = <1>; and you need to put <3>
                      

                      ez.analog.com/.../changing-the-vcxo-80-mhz-ad9375
                      
			
                      

		
			
	      

		
		
	
                      
	
                      
		
                      
			
		
                      
	
                      
	
                      
		
						
						
				
						
				
				
		
		
                      
			
		
                      
	
                      

                      

                      • 

	

                    • 
	
                      



	
		
	
	



                      
	
                      
		
                      
							
					
                      
		
                      
			
													0
							
			
				
									
							        
			
			
			
                        
            
						
                            
            
            				
            
                on Mar 4, 2022 6:24 AM
            
            
												
						in reply to mhennerich
					
									
                        
	
                        

		
		
                        
					
                        even if u substitute 1....
                        

                        mmcblk0: p1 p2 p3
                        random: fast init done
                        jesd204: /amba/spi@e0006000/ad9528-1@0,jesd204:0,parent=spi0.0: Using as SYSREF provider
                        axi_adxcvr 44a60000.axi-adxcvr-rx: AXI-ADXCVR-RX (17.01.a) using CPLL on GTX2 at 0x44A60000. Number of lanes: 2.
                        axi_adxcvr 44a50000.axi-adxcvr-rx-os: AXI-ADXCVR-RX (17.01.a) using CPLL on GTX2 at 0x44A50000. Number of lanes: 2.
                        axi_adxcvr 44a80000.axi-adxcvr-tx: AXI-ADXCVR-TX (17.01.a) using QPLL on GTX2 at 0x44A80000. Number of lanes: 4.
                        axi_sysid 45000000.axi-sysid-0: [adrv9371x] on [zc706] git <43cdc6263baf3edb166a3def6fab15bc81c4c729> clean [2022-02-17 11:38:05] UTC
                        fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
                        usbcore: registered new interface driver snd-usb-audio
                        NET: Registered protocol family 10
                        Segment Routing with IPv6
                        sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
                        NET: Registered protocol family 17
                        NET: Registered protocol family 36
                        Registering SWP/SWPB emulation handler
                        [drm] Cannot find any crtc or sizes
                        [drm] Initialized axi_hdmi_drm 1.0.0 20120930 for 70e00000.axi_hdmi on minor 0
                        ad9371 spi0.1: ad9371_probe : enter
                        cf_axi_dds 44a04000.axi-ad9371-tx-hpc: Analog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x44A04000 mapped to 0x(ptrval), probed DDS AD9371
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition initialized -> probed
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition initialized -> probed
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition initialized -> probed
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition probed -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition probed -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition probed -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage3
                        [drm] Cannot find any crtc or sizes
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> link_setup
                        ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                        ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                        ad9371 spi0.1: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                         (64)
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] got error from cb: -14
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: Rolling back from 'link_setup', got error -14
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> link_setup
                        ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                        ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                        ad9371 spi0.1: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                         (64)
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] got error from cb: -14
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: Rolling back from 'link_setup', got error -14
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> link_setup
                        ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                        ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                        ad9371 spi0.1: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                         (64)
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] got error from cb: -14
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: Rolling back from 'link_setup', got error -14
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> link_setup
                        ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                        ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                        ad9371 spi0.1: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                         (64)
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] got error from cb: -14
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: Rolling back from 'link_setup', got error -14
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> opt_setup_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage1 -> link_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> clk_sync_stage3
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> clk_sync_stage2
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage1
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> link_pre_setup
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> link_supported
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> device_init
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> idle
                        jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: FSM completed with error -14
                        asoc-simple-card adv7511_hdmi_snd: spdif-hifi <-> 75c00000.axi-spdif-tx mapping ok
                        cf_axi_adc 44a00000.axi-ad9371-rx-hpc: ADI AIM (10.01.b) at 0x44A00000 mapped to 0x(ptrval), probed ADC AD9371 as MASTER
                        input: gpio_keys as /devices/soc0/gpio_keys/input/input0
                        rtc-pcf8563 5-0051: setting system clock to 2022-03-04 11:18:57 UTC (1646392737)
                        
			
                        

		
			
	      

		
		
	
                        
	
                        
		
                        
			
		
                        
	
                        
	
                        
		
						
						
				
						
				
				
		
		
                        
			
		
                        
	
                        

                        

                        • 

	

                      • 
	
                        



	
			
		
	



                        
	
                        
		
                        
							
					
                        
		
                        
			
													+1
							
			
				
									
							        
			
			
			
                        •  Analog Employees  
                        
            
						
                            
            
            				
            
                on Mar 4, 2022 6:46 AM
            
            
												
						in reply to bobrik_744
					
									
                        
	
                        

		
		
                        
					
                        Please see here:
                        

                         AD9371 custom profile:calibration error 
                        

                        Can you try:
                        

                        adi,clocks-clk-pll-vco-freq_khz = <6400000>; 
                        

                        adi,clocks-clk-pll-hs-div = <4>;
                        

                        adi,clocks-clk-pll-vco-div = <0>; /* VCODIV_1 */
                        

                        -Michael
                        
			
                        

		
			
	      

		
		
	
                        
	
                        
		
                        
			
		
                        
	
                        
	
                        
		
						
				
						
						
				
				
		
		
                        
			
		
                        
	
                        

                        

                        • 

	

                      • 
	
                        



	
		
	
	



                        
	
                        
		
                        
							
					
                        
		
                        
			
													0
							
			
				
									
							        
			
			
			
                          
            
						
                            
            
            				
            
                on Mar 4, 2022 6:56 AM
            
            
												
						in reply to mhennerich
					
									
                          
	
                          

		
		
                          
					
                          yes it works! you can pin this on the wiki, it took me a lot of time
                          

                          root@analog:~# dmesg | grep ad9
                          [ 0.656405] jesd204: created con: id=0, topo=0, link=0, /amba/spi@e0006000/ad9528-1@0 <-> /fpga-axi@0/axi-adxcvr-tx@44a80000
                          [ 0.666367] jesd204: created con: id=1, topo=0, link=2, /amba/spi@e0006000/ad9528-1@0 <-> /fpga-axi@0/axi-adxcvr-rx-os@44a50000
                          [ 0.676571] jesd204: created con: id=2, topo=0, link=1, /amba/spi@e0006000/ad9528-1@0 <-> /fpga-axi@0/axi-adxcvr-rx@44a60000
                          [ 0.718173] jesd204: created con: id=6, topo=0, link=0, /fpga-axi@0/axi-jesd204-tx@44a90000 <-> /fpga-axi@0/axi-ad9371-tx-hpc@44a04000
                          [ 0.728990] jesd204: created con: id=7, topo=0, link=1, /fpga-axi@0/axi-jesd204-rx@44aa0000 <-> /amba/spi@e0006000/ad9371-phy@1
                          [ 0.739195] jesd204: created con: id=8, topo=0, link=2, /fpga-axi@0/axi-jesd204-rx@44ab0000 <-> /amba/spi@e0006000/ad9371-phy@1
                          [ 0.749381] jesd204: created con: id=9, topo=0, link=0, /fpga-axi@0/axi-ad9371-tx-hpc@44a04000 <-> /amba/spi@e0006000/ad9371-phy@1
                          [ 0.759848] jesd204: /amba/spi@e0006000/ad9371-phy@1: JESD204[0] transition uninitialized -> initialized
                          [ 0.768032] jesd204: /amba/spi@e0006000/ad9371-phy@1: JESD204[1] transition uninitialized -> initialized
                          [ 0.776213] jesd204: /amba/spi@e0006000/ad9371-phy@1: JESD204[2] transition uninitialized -> initialized
                          [ 2.358268] ad9371 spi0.1: ad9371_probe : enter
                          [ 2.370933] ad9528 spi0.0: spi0.0 supply vcc not found, using dummy regulator
                          [ 2.377725] ad9528 spi0.0: Linked as a consumer to regulator.0
                          [ 2.419576] jesd204: /amba/spi@e0006000/ad9528-1@0,jesd204:0,parent=spi0.0: Using as SYSREF provider
                          [ 2.672278] ad9371 spi0.1: ad9371_probe : enter
                          [ 2.707074] cf_axi_dds 44a04000.axi-ad9371-tx-hpc: Analog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x44A04000 mapped to 0x(ptrval), probed DDS AD9371
                          [ 2.721623] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition initialized -> probed
                          [ 2.731319] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition initialized -> probed
                          [ 2.740986] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition initialized -> probed
                          [ 2.750670] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition probed -> idle
                          [ 2.759725] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition probed -> idle
                          [ 2.768782] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition probed -> idle
                          [ 2.777847] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition idle -> device_init
                          [ 2.787341] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition idle -> device_init
                          [ 2.796831] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition idle -> device_init
                          [ 2.806334] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition device_init -> link_init
                          [ 2.816256] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition device_init -> link_init
                          [ 2.826181] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition device_init -> link_init
                          [ 2.836109] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_init -> link_supported
                          [ 2.846298] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_init -> link_supported
                          [ 2.856477] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_init -> link_supported
                          [ 2.866930] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_supported -> link_pre_setup
                          [ 2.877551] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_supported -> link_pre_setup
                          [ 2.888169] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_supported -> link_pre_setup
                          [ 2.898791] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_pre_setup -> clk_sync_stage1
                          [ 2.909494] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_pre_setup -> clk_sync_stage1
                          [ 2.920195] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_pre_setup -> clk_sync_stage1
                          [ 2.930906] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage1 -> clk_sync_stage2
                          [ 2.941696] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage1 -> clk_sync_stage2
                          [ 2.952484] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage1 -> clk_sync_stage2
                          [ 2.963281] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage2 -> clk_sync_stage3
                          [ 2.974073] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage2 -> clk_sync_stage3
                          [ 2.984869] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage2 -> clk_sync_stage3
                          [ 3.839677] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clk_sync_stage3 -> link_setup
                          [ 3.850044] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clk_sync_stage3 -> link_setup
                          [ 3.860399] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clk_sync_stage3 -> link_setup
                          [ 11.329144] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_setup -> opt_setup_stage1
                          [ 11.339597] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_setup -> opt_setup_stage1
                          [ 11.350041] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_setup -> opt_setup_stage1
                          [ 11.360495] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage1 -> opt_setup_stage2
                          [ 11.371455] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage1 -> opt_setup_stage2
                          [ 11.382416] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage1 -> opt_setup_stage2
                          [ 11.393385] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage2 -> opt_setup_stage3
                          [ 11.404351] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage2 -> opt_setup_stage3
                          [ 11.415312] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage2 -> opt_setup_stage3
                          [ 11.426284] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage3 -> opt_setup_stage4
                          [ 11.437248] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage3 -> opt_setup_stage4
                          [ 11.448209] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage3 -> opt_setup_stage4
                          [ 11.459187] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage4 -> opt_setup_stage5
                          [ 11.470156] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage4 -> opt_setup_stage5
                          [ 11.481115] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage4 -> opt_setup_stage5
                          [ 11.494333] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition opt_setup_stage5 -> clocks_enable
                          [ 11.505047] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition opt_setup_stage5 -> clocks_enable
                          [ 11.515751] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition opt_setup_stage5 -> clocks_enable
                          [ 11.526653] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition clocks_enable -> link_enable
                          [ 11.536928] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition clocks_enable -> link_enable
                          [ 11.547198] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition clocks_enable -> link_enable
                          [ 11.559936] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_enable -> link_running
                          [ 11.570130] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_enable -> link_running
                          [ 11.580312] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_enable -> link_running
                          [ 11.767056] ad9371 spi0.1: AD9375 Rev 4, Firmware 5.2.2 API version: 1.5.2.3566 successfully initialized via jesd204-fsm
                          [ 11.776639] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[0] transition link_running -> opt_post_running_stage
                          [ 11.787775] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[1] transition link_running -> opt_post_running_stage
                          [ 11.798909] jesd204: /amba/spi@e0006000/ad9371-phy@1,jesd204:1,parent=spi0.1: JESD204[2] transition link_running -> opt_post_running_stage
                          [ 11.841562] cf_axi_adc 44a00000.axi-ad9371-rx-hpc: ADI AIM (10.01.b) at 0x44A00000 mapped to 0x(ptrval), probed ADC AD9371 as MASTER
                          
			
                          

		
			
	      

		
		
	
                          
	
                          
		
                          
			
		
                          
	
                          
	
                          
		
						
						
				
						
				
				
		
		
                          
			
		
                          
	
                          

                          

                          • 

	

                        • 
	
                          



	
			
		
	



                          
	
                          
		
                          
							
					
                          
		
                          
			
													+1
							
			
				
									
							        
			
			
			
                          •  Analog Employees  
                          
            
						
                            
            
            				
            
                on Mar 4, 2022 7:09 AM
            
            
												
						in reply to bobrik_744
					
									
                          
	
                          

		
		
                          
					
                          Just changing the adi,clocks-clk-pll-vco-div aka. clkPllVcoDiv and keeping adi,clocks-clk-pll-vco-freq_khz aka. clkPllVcoFreq_kHz at the same rate didn't make much sense to me.
                          

                          The profile wizard original solution was:
                          

                           <deviceClock_kHz=80000>
                           <clkPllVcoFreq_kHz=9600000>
                           <clkPllVcoDiv=1.5>
                           <clkPllHsDiv=4>
                          

                          This violates, and causes this error: 
                          

                          ERROR: 64: CLKPLL VCO frequency exceeded max(9.216Ghz) in VCO divider /1.5 case ()
                          

                          I think that the math behind these dividers:
                          

                          9600000 / (1.5 * 4) = 1600000 
                          

                          We need to maintain the 1600000, so:
                          

                          6400000 / (1 * 4) = 1600000  
                          

                          Is a solution within all operation ranges.
                          

                          If you look further to understand where the 1600000 is coming from:
                          

                           <adcDiv=1>
                           <rxFirDecimation=4>
                           <rxDec5Decimation=5>
                           <enHighRejDec5=1>
                           <rhb1Decimation=2>
                           <iqRate_kHz=40000>
                           <rfBandwidth_Hz=20000000>
                           <rxBbf3dBCorner_kHz=20000> 
                          

                          iqRate_kHz  * rhb1Decimation * rxDec5Decimation * rxFirDecimation * adcDiv = 1600000 
                          

                          Likewise on TX.
                          

                          -Michael
                          
			
                          

		
			
	      

		
		
	
                          
	
                          
		
                          
			
		
                          
	
                          
	
                          
		
						
				
						
						
				
				
		
		
                          
			
		
                          
	
                          

                          

                          •