I'm currently working on the AD9361 on the ADRV9361-z7035 with the ADRVCRR-BOB board. I wanted to run the example that is given in the SD card but it's failing when I'm running thadi_update_tools.sh. There is the message that the terminal gives me :
root@analog:~# sudo adi_update_tools..shwget: unable to resolve host address â€˜github.comâ€eth0 Link encap:Ethernet HWaddr 00:02:b5:01:06:75 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:28 Base address:0xb000lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:58 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4260 (4.2 KB) TX bytes:4260 (4.2 KB)Network Connection: FAILED
If anyone faced this problem or has an idea about how to solve it it would be really great !
Thanks & Regards !
eth0 has no IP address. Therefore, it will not have internet access to download updates.
Make sure the board is connected to a network with internet access and the board gets a valid IP.
Thank you really much, the issue was solved by changing the ethernet wire and configuring differently the network card. The wire wasn't compatible with my card.