Enable USB Serial Converter Driver

You have to rebuild the kernel. Michael's additional step is done at the configuration portion of this generic build guide here: https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/software/linux/zynq_2014r2#on_the_development_host

-Travis

I tried to follow the instructions in the link you provided but ran into an error while running make, /opt/Xilinx/SDK/2016.4/gnu/arm/lin/bin/arm-xilinx-linux-gnueabi-gcc: No such file or directory. Below are the terminal commands I used:

As superuser

1) #git clone https://github.com/analogdevicesinc/linux.git

2) #cd linux

3) #git checkout origin/2017_R1 (since we have Vivado SDK 2016.4 located in /opt/Xilinx/SDK/2016.4...)

4) #source /opt/Xilinx/SDK/2016.4/settings.sh

5) #export ARCH=arm

6) #export CROSS_COMPILE=arm-xilinx-linux-gnueabi-

7) #make zynq_xcomm_adv7511_defconfig

8) #make menuconfig (this is where I select the desired USB serial drivers)

9) #make -j5 UIMAGE_LOADADDR=0x8000 uImage

At this point the make fails with the error above. I have verified that arm-xilinx-linux-gnueabi-gcc exists in the /opt/Xilinx/SDK/2016.4/gnu/arm/lin/bin directory.

What mistake have I made or what else should I try?

Thanks,

Glen

The sourced file is settings64.sh not settings.sh for 2016.4.

-Travis

I guess you don't have the 32-bit libs installed ...

Please take a look here:

https://wiki.analog.com/university/tools/pluto/building_the_image?s[]=plutosdr#prerequisites

That was a typo on my part. I do indeed have settings64.sh in /opt/Xilinx/SDK/2016.4/.

I'll take a look at the link below to see if it provides any help.

Glen

That was a typo on my part. I do indeed have settings64.sh in /opt/Xilinx/SDK/2016.4/.

I'll take a look at the link below to see if it provides any help.

Glen