I used to run zedboard ad9361 adi company official demo, used to receive 2.4 GHZ wireless, now I run the following code, hoping to find ad9361 DDR the position of the received data, as far as I know the received data need to configure the ADC (namely axi_ad9361_adc_dma) by HP storage in the DDR interface, but I didn't find the ADC (namely axi_ad9361_adc_dma) configuration information, I need to manually add the code?
Below is adi's official code
I found this in the file platform.c：
void axiadc_init(struct ad9361_rf_phy *phy) void axiadc_write(struct axiadc_state *st, unsigned reg, unsigned val)
Whether these instructions need to be called in the main function.The implementation USES Axi_ad9361_adc_dma to store the received data in DDR.I need help.
Starting from the unmodified software, enable XILINX_PLATFORM and ADC_DMA_EXAMPLE in config.h. You don't have to do anything else.
The same remark as on your other thread: don't use the 2016_R2 branch - use the master branch instead.
Thank you very much. I'll continue my research.