We are trying to do some work with ZCU102 and AD9371. And we follow the steps in https://wiki.analog.com/resources/eval/user-guides/mykonos/no-os-setup to do No-os setup.
Finally we have done.
But when we try to test the IQ data with Capture.bat. Nothing happens,we can not find the iq_rx1.csv and iq_rx2.csv files.
Here are my capture.bat and capture.tcl.
PS: Vivado 2018.2
I can't open the archive. Are the scripts the same as https://github.com/analogdevicesinc/no-OS/tree/master/ad9371/scripts/xilinx?
You can add the scripts as capture.bat.txt here. The .bat and .tcl formats are not accepted by EZ platform.
Thank you for replying!
for the .bat file, there is no xmd.bat file in sdk\2018.2\bin. So Vivado 2018.2 do not support xmd method.
I find there is a way to use xsdb method.
bat file is:
IF "%PROCESSOR_ARCHITECTURE%"=="x86" set XSDB_DIR=c:\Xilinx\vivado\SDK\2018.2\binIF "%PROCESSOR_ARCHITECTURE%"=="AMD64" set XSDB_DIR=c:\Xilinx\vivado\SDK\2018.2\bin
%XSDB_DIR%\xsdb.bat -tcl capture.tcl
tcl file is:
But we get this error:
Hi,You are right the xmd is deprecated and you should use xsdb. The capture scripts for adrv9371 are https://github.com/analogdevicesinc/no-OS/tree/master/ad9371/scripts/xilinxPlease use those.
Is there any reason why you want to use the https://github.com/analogdevicesinc/no-OS/blob/master/scripts/xilinx_capture.tcl ?I've written that script for a generic capture approach; it was designed to be used by make.If you want to use it you have to call it with arguments https://github.com/analogdevicesinc/no-OS/blob/master/scripts/xilinx_capture.tcl#L9-L13. Note that 2 RF channels will be 4 channel for the generic script.You don't have to use BAT. You can open the SDK GUI, tools > xsct console.Andrei
Thank you! We have solved the problem!
We met the same problem , even though source xilinx_capture.tcl in xcst as your mentioned. Would you kind to advise if any ignored ? Thanks.