Start-up that has a proof of concept they are trying to demonstrate to the largest customer....
They have been in contact with central apps to date. The issue they have is that have an image 2017R2, but it not communicating with Mathlab. They only need to loop back over RX channels with Mathlab (HW in the loop from Mathworks) with any version of Mathlab. They will generate their own custom image.
Can we get them an image that does this?
There is a page in your wiki which was about streaming data in matlab, but after following instruction for setting everything up, the link for examples are broken.
IIO System Object [Analog Devices Wiki]
The IIO System Object is based on the MATLAB System Objects specification. It is designed to exchange data over Ethernet with an ADI hardware system connected to a FPGA/SoC platform running the ADI Linux distribution.
We do not have explicit examples for AD9371 in MATLAB, but you can create them from the AD9361 examples here: MathWorks_tools/hil_models/fmcomms2_3_data_stream at master · analogdevicesinc/MathWorks_tools · GitHub
Everything is built off the libiio infrastructure, so any device with an IIO driver (like the AD9371) can be used with our IIO objects in MATLAB.
The "Example Models" link has been fixed. I'm assuming that is the one you were asking about.
Can you please attach the configuration file ad9371.cfg?
Example has been added here: MathWorks_tools/hil_models/adrv9371 at master · analogdevicesinc/MathWorks_tools · GitHub
Anita with Arrow here. Thanks for helping us thus far. Customer has asked if you have below file, and if you have any input on questions below?
Same as 9371.cfg file there is a simulink block for 9361 which I could not find the same for the 9371. I wonder if they can provide us the example "QPSK" (which they have it online for 9361 ) for 9371?
- I am able to write and read to/from the AD9371 board but the receive side seems to be random.
2- Is it possible to have a real-time read and write ?