I used petalinux2017.4 to add the 4.9 kernel, and then added the device tree to generate BOOT and Ulmage. After entering the SD card less, I only saw iio: device0 under sys / bus / iio /, and only these parameters after entering. How do I modify it.
That iio:device folder is the sysfs interface for the xadc. Can you do a "cat /sys/bus/iio/devices/iio:device*/name" ?
It might work, but keep in mind that at this point, only Petalinux-v2018.3 is supported: https://wiki.analog.com/resources/tools-software/linux-build/generic/petalinux
But when I built the HDF file with petalinux2018.3, it prompted an error in the pl.dsti file. Why?
Please help me to see, every time I use petalinux2018.3 to compile the hdf file of the HDL project provided by the adi official website, compile u-boot, it will go wrong.