well i connected the EVAL-ADAU1761Z to raspberry pi i used this also https://ez.analog.com/linux-device-drivers/linux-software-drivers/f/q-a/111524/adau1761-on-raspberry-pi3/334051
but no success
aplay -D default:CARD=Seri MONO-000.WAV
no sound comes out
here is pcm list
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0card 1: adau1761 [adau1761], device 0: bcm2835-i2s-adau-hifi adau-hifi-0  Subdevices: 1/1 Subdevice #0: subdevice #0
First good thing that I see is that you have bcm2835-i2s-adau-hifi card. That's perfect.
Now next step would be to check with an oscilloscope if you have the I2S clocks/signals available. I2S_BCLK, I2S_FS, I2S_DIN, I2S_DOUT.
Also what's the position of S5? It should be in DOWN position.
Also based on what's your output data source on RPi->alsamixer->ADAU1761 card you have to select in DAC Playback Mux -> DSP if you have loaded a DSP firmware or AIFIN if there is no firmware and you want just to output the I2S data.
here is channel 0 gpio 18
channel 1 gpio 19 Connected to LRCLK
and channel 2 gpio 21 connected to DAC
I2S signals look good.
Please take a look in ALSA mixer and check your volume/settings.
Also you can try to store the current ALSA controls configuration in a file and upload it here so I can have a look.
You can use the command
alsactl --file ~/Documents/asound.state store
here is asound state for adau1761
here are the i2c commands
I looked over your mixer configuration and saw some problems.
Switches "Right Playback Mixer Right DAC" and "Left Playback Mixer Left DAC" are set on "false".
Please open alsamixer navigate to before mentioned items and activate them (press M key).
Also if in your DSP program you don't have I2S inputs configured you should set the DAC Playback Mux to AIFIN and not DSP.
well i tried it with no result what so ever i even used the mic input same thing