In Page 23 of MAX17411 datasheet it is mentioned "POKA is forced low in shutdown (EN = GND) and after any fault condition is detected on either regulator." and it can be read that POKA goes Low when OVP and UVP failure is detected in A or B. In

Question

In Page 23 of  MAX17411 datasheet it is mentioned "POKA is forced low in shutdown (EN = GND) and after any fault condition is detected on either regulator." and it can be read that POKA goes Low when OVP and UVP failure is detected in A or B. In

Accepted Answer

There is ~1us delay between falling edges of POK_. The POK_ of the regulator that has a fault goes low first, as shown in below waveform.

Partner Forums

Partner Libraries

In Page 23 of MAX17411 datasheet it is mentioned "POKA is forced low in shutdown (EN = GND) and after any fault condition is detected on either regulator." and it can be read that POKA goes Low when OVP and UVP failure is detected in A or B. In