MAX14748 data sheet errors

MAX14748 datasheet document ID 19-100081; Rev 5; 9/18 has the following errors:  

1. This appears several times throughout the datasheet as a typo: "Ready-Only if AppWrtPrtct = “(1) Protected” (See Table 61)".  This should be "Read-Only" rather than "Ready-Only"
2. Table 61.
   1. "MtChTmr" should be "MtChgTmr" (missing "g")
   2. Register Bit Default Values, the value for BatReChg[1:0] is listed as "100mV". However, that is not a valid value for that register field. Its a typo, it should be 200mV.