MAX3051 is a 3.3V CAN transceiver that can support a maximum speed of 1Mbps. If used for low speed signal transmission, it requires a resistor between the RS pin and the ground to limit the slew rate and enhance the system's EMI performance. The resistor value should be chosen based on the following formula:
/msdyn_blobfile/$value)
/msdyn_blobfile/$value)
MAX3051 has no minimum speed limitation. Adjust RRS to limit the maximum transmission rate, which can be between 40kbps to 500kbps. If your system's data transmission speed is 5kbps, then a 40kpbs limit will suffice for calculating the RRS.
MAX3051 has no minimum speed limitation. Adjust RRS to limit the maximum transmission rate, which can be between 40kbps to 500kbps. If your system's data transmission speed is 5kbps, then a 40kpbs limit will suffice for calculating the RRS.