Yes, you can implement a hot swap system with these parts. We have customers with such implementations in production.
There are 3 considerations:
1. Voltages spikes. PoC systems use inductors in…
Yes, the MAX96706 line-fault monitors can be disabled in register 0x08, bits 7 and 6. If you wish to keep the line-fault monitors disabled permanently, the LMN0 and LMN1 pins can be left unconnected. The…
All Maxim GMSL-1 serializers and deserializers (SerDes) are compatible with each other. Our SerDes parts are typically mentioned together (e.g. MAX96705 and MAX96706), but these pairings are only a suggestion…
The transmission path is a low-pass filter, it is necessary to amplify the high bandwidth by EQ.
When this gain is abnormally high, the slew rate of data becomes faster and overshoot and undershoot occur…
There is an error in the datasheet (Document number 19-8248; Rev 1; 3/17, Page 47, ewm(0x13)BITFIELD for EWM_MIN_THR).
The EWM_MIN_THR can have a value from 0 (disabled) to 31. The equation should be…
Q. What PRBS type do I use for the MAX96705 (serializer) and the MAX96706 (deserialzer)? A. For these two parts you should use the default PRBS test as indicated in the data sheet. For these two parts…
