MAX9288: FAQ

The MAX9288 is compatible with the MAX9263 and both can work together. Any features that both do not support will be lost. For example, the MAX9288 does not support HDCP. For more information about compatibility…

The power consumption of MIPI is the largest when connected 2 lanes, when connected 4 lanes it will be reduced by about 20mW. The reason is that when the number of lanes is changed, the CSI frequency…

MAX9288与MAX9263可以配合使用。但 两者 不同时支持的功能将失效。例如，MAX9288不支持HDCP。详细信息请参靠MAX9288数据手册第84页表格21。

是的，MAX9288在做GMSL到CSI-2转换时，HS/VS应为高电平有效，若输入为低电平有效需配置INVHSYNC和INVVSYNC寄存器反转HS/VS输入信号。

连接2 lane MIPI的功耗是最大的，连接4 lane时的功耗会降低大约20mW. 原因是改变lane的数量时，CSI频率和PLL也会发生变化。从2 lane变为4 lane，频率降低，PLL的功耗也随之降低。所以2 lane MIPI的功耗最大。

The reverse channel in serializer/deserializer pairs can be susceptible to low frequency noise especially when using Power Over Coax. The first thing to check should be the I2C bitrate speed and confirm…