The GPI input on derserializers is sent in the reverse direction on a GMSL1 link and output on GPO at the serializer. This can be used for getting an interrupt from a touchscreen controller back to an…
In a MAX9275 application that does not require digital audio transmission, SD can be used as an additional parallel input. Note that SCK and WS cannot be used as additional parallel inputs. For this configuration…
Our GMSL EVKITS have had three different microcontrollers on them throughout the years. The first GMSL EVKITS that we developed had a Dallas microcontroller on them. Then, we used a Nuvoton microcontroller…
Some of Maxim serializers and deserializers have a built-in pseudorandom binary sequence (PRBS) generator and receiver for bit error rate (BER) testing on a GMSL link. The serializer generates PRBS data…
If you are not using the line fault detection feature in the MAX9275 then you should leave the LMN0 and LMN1 pins floating by disconnecting the pull-up and pull-down resistors.
12-bit monochrome video data includes 12 bits of data + HS+VS+DE = 15 parallel into a GMSL device like the MAX9275, per sample. So, BWS = 0 (24-bit mode) configuration allows a pixel clock frequency up…
