GMSL1 has both forward and reverse data. A customer would need to use high impedance probes and use filtering to take out only the forward or reverse data. As GMSL is a proprietary link, there is not much…
GMSL2 has both forward and reverse data. Due to the proprietary nature of the GMSL link, a customer will not be able to see meaningful data.
It is better to check for decode/PRBS/CRC errors.
The expectation is that the cable and system never fail the GMSL channel specification limits. The cable or system, under all expected conditions, must still pass the channel specification. Link margin…
Customers should follow the GMSL specification according to whichever mode is being used. thus a part working in GMSL1 mode should follow the GMSL1 specs.
However, to reduce the amount of redesign, it…
The Nyquist rate is half the baud rate of a given signal. The baud rate is different from bit rate that it is the "number of changes in a signal per second" while bit rate is "number of bits per second…
ohmic losses along the PCB traces and cable conductors; dissipated power through the PCB and cable dielectric; and the resistance of the metal-to-metal interfaces of the connectors, In addition, impedance…
