Products Mentioned

ADuM4160 Production
The ADuM4160 is a USB port isolator, based on Analog Devices, Inc., iCoupler® technology. Combining high speed CMOS and monolithic air core transformer...
Datasheet
ADuM4160 on Analog.com

  • State Verified Answer
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 385 views
  • Users 0 members are here
Options 

        

            Post
             Go back to editing
        

    

    


    

    









		


















	
	
			
	
			
		
	
	
		

		
Reinforced Insulation ADUM4160 with the standard IEC61010



		

			

									
					    compactelectric
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Feb 28, 2017 
				
			
			
		
    

				
		
    
		    		    
		    
		    	
			
    Dear Sir/Madam,
    
 
    We will take the ADUM4160 for a project. For this project we need a double ore reinforced insulation from 1000 V/DC with the standard IEC61010. Is this possible with the ADUM4160? Are there any certifications about this?
    
									
			        
		
    

				
						
        

    
    Tags: 
                                            
                 Digital Isolation Technology
                
                                                    
                 USB isolators
                
                                                    
                 adum4160
                
                                
            
    
    
    

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    
















    
	
    
	
    
					



			


				
	









	
      
	

    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Mar 3, 2017 10:23 PM
            
            
					
      
	
      

		
		
      
					
      Hello Compactelectric,
      
 
      Unfortunately there is an issue with IEC61010 ed3 and our legacy designs that prevents us from getting that certification directly.  These products predate edition 3 and one of the requirements of that standard is a 0.4mm loop height on the bond wires going across the isolated paddle.  Without the correct loop height they will not issue a certification, and we can not go back and simply change the bonding height, it would invalidate multiple other certifications. 
      
 
      We are addressing this for new products that require IEC61010.
      
 
      Many of our customers use VDE-0884-10 as a valid IEC equivalent standard to certify these products to reinforced for IEC61010 systems. The parts meet the IEC61010 standard in every other way.
      
 
      Best Regards,
      
 
      MSCantrell
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
				
						
						
				
				
		
		
      
			
		
      
	
      

      

      •