Our customer are going to test their products and they would like to get IEC/CSA/TUV Certification and Test Report for IEC 60950-1 (Standard version : A2)
We can found the quality information from below link , but our customer still need to get full Certification and Test Report for their test center reference.
Could you help to check the report for parts as below and help to release documents to us?
Probably , please just let us know the download link that we can download directly?
IEC/CSA/EN(TUV)60950-1 Certification and Test report. ( (Standard version : A2)
Another issue, our isolator already passed the test for altitudes ≤ 2000m (You can refer to report as below and note_7. )
7. The creepage and clearance has been evaluated for altitudes ≤ 2000m, in pollution degree 2 and overvoltage category II for 60950-1 and overvoltage category III for 60601 3rd Ed)
The creepage and clearance has been evaluated for altitudes ≤ 2000m
Customer also ask 5000 meters test result. As CQC report shown , We shall can pass 5000 meters test.
If possibility ,Could you help to transfer the CQC report to CB or IEC certification for those parts?
CB or IEC report which support 5000 meter spec.
You can refer to attached CB report which convert from CQC for ADuM220X.
Thanks for your help.
For the IEC certification and CB reports, please see the mail i send to you.
when comes to altitude >2000m, IEC60950 refers to IEC60664-1 table A.2. there is a altitude correction factor in this table. At 5000m altitude, the minimum clearence required shall be multipied by 1.48 based on 2000m value.