Post Go back to editing

AD215BY Obsolete – Request for Replacement Part

Category: Datasheet/Specs
Product Number: AD215BY, AD215

Hello,

We are currently using the AD215BY 120 kHz bandwidth isolation amplifier in one of our applications.

We understand that the AD215BY has been discontinued. Could you please confirm whether Analog Devices has a recommended replacement or successor for the AD215BY?

If a replacement part is available, we would appreciate it if you could provide the part number and datasheet.

Additionally, could you please confirm whether the recommended replacement is pin-compatible with the AD215BY and can be used as a drop-in replacement without any modifications to the existing PCB?

Thank you for your support.

Best regards,

Thread Notes

  • 1. Analog Devices Official Successor / Pin-Compatible Status

    • Recommended ADI Replacement: None. Analog Devices discontinued the AD215 family (including AD215AY and AD215BY) without naming an official direct replacement or successor.
    • Pin-Compatibility / Drop-in Replacement from ADI: No. Analog Devices does not manufacture any pin-compatible, drop-in replacement for the AD215BY.

    Why ADI Has No Direct Replacement: ace@spacechips.tech

    The AD215BY was built using a hybrid, through-hole 12-pin SIP module architecture containing internal proprietary transformer-coupled DC/DC converters and signal coupling. ADI has long transitioned its isolation portfolio to surface-mount silicon solutions based on iCoupler® micro-transformer technology (such as the ADuM family) or isolated $\Sigma$-$\Delta$ modulators (such as the AD740x / ADuM770x series). None of these modern ADI solutions can plug into the existing 12-pin SIP through-hole footprint, and all require a complete PCB redesign.

    2. Available Options to Address the Discontinuation

    Option A: Third-Party Pin-Compatible Drop-In Replacement (No PCB Changes)

    If you require a solution that works on your existing PCB without layout or component modifications:

    • Manufacturer: Analog Technologies, Inc. (ATI)
    • Part Number: AD215BYATI (Direct replacement for AD215BY)
    • Pinout / Package: Same 12-pin SIP footprint and pin configuration.
    • Key Specifications:

      • Isolation Voltage: 1500 V rms (matches AD215BY)
      • Bandwidth: 300 kHz (exceeds the 120 kHz of the original AD215BY)
      • Isolated Power Output: Built-in isolated $\pm15\text{ VDC}$ at $\pm10\text{ mA}$ (matches original specification)
      • RoHS Status: Fully RoHS compliant

    Option B: Board Redesign with Modern Isolated Amplifiers

    If your product lifecycle allows a PCB spin, moving away from legacy hybrid SIP modules to modern monolithic isolated amplifiers is generally recommended for long-term supply stability and cost reduction:

    • Texas Instruments AMC series: Parts like the AMC1301, AMC1311 (high-impedance input), or AMC3330 (integrated DC/DC converter).
    • ADI Modern Signal Chain: Using an isolated ADC / $\Sigma$-$\Delta$ modulator (e.g., ADuM7701 / AD7403) or an isolated amplifier paired with an isolated power solution (such as the ADuM5000 / ADuM6000 series).
    • Note: This path requires replacing the through-hole SIP footprint with SOIC packages, providing an isolated front-end power rail, and adjusting the signal path.

    Summary

    • From Analog Devices: There is no pin-compatible drop-in part available.
    • Drop-in with zero PCB rework: You will need to evaluate the AD215BYATI from Analog Technologies, Inc.

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.