What are voltage threshold in HTL mode (current source off)?

Question

Hi 
 For MAX22196, if CNFGx register is configured with CURRx[1:0]=00 (current source off) , what are voltage threshold on input? I don't find its in datasheet. Table 1 shows that HIHTR don't care. Are they different if CURRx[1:0]=11. 
 In my application, REGEN is short to ground, V24=24V, VA=3.3V and REFDI=12k. 
 Thanks for your help.

ShastaThomas · Accepted Answer

Hello, 
 My apologies for the delayed response on this. 
 I can see how the don't care (X) label is a bit misleading in this case. While the status of the HITHR bit is not required to set the mode to high-impedance or HTL (CURR_ = 00) , it is still required to set the thresholds, as outlined in the datasheet. You need to set the SOURCE and HITHR bits for a given channel to set the threshold, as shown in the EC table on pages 5-6. 
 Setting the CURR_ bits to 11 will put the input channel into TTL mode. The TTL thresholds are also shown in the EC table. 
 Thank you, 
 Shasta)

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

Products Mentioned

Associated Drivers

Thread Details

What are voltage threshold in HTL mode (current source off)?

Before You Switch