Hot-plug CAN application with ADM3058E transceiver

Question

Hi, 
 I need to select the right CAN transceiver for an application and the question is: did ADM3058E support hot-plug application ? 
 
 Thanks 
 Luci

ericb · Accepted Answer

Hello Luci, 
 Yes, the ADM3058E should be compatible with hot-plug applications since its bus pins are high-Z when the VDD2 supply is off. When the VDD2 supply is present, the bus pins will be in the recessive state until both VDD1 is present and TxD is asserted low. Connecting the ADM3058 to an active bus when in either the high-Z or recessive states should not disturb the bus. 
 
 Eric)

Partner Forums

Partner Libraries

Products Mentioned

Hot-plug CAN application with ADM3058E transceiver