About unused channels of ADN4663/ADN4664

Hi Nrsk, 

I would recommend not terminating the unused output of the ADN4663. This will save on power consumption. You can also terminate this output, but the power consumption of the ADN4663 will be slightly higher. 

The ADN4664 unused input should not be left floating. I would recommend any of these options:

1. Connecting the ADN4664 unused input to the unused output of the ADN4663, so that the input is driven.
2. Connecting ADN4664 RIN2+ to VCC and RIN2- to GND. (Set unused output to logic 1)
3. Connecting ADN4664 RIN2+ to GND and RIN2- to VCC. (set unused output to logic 0)

Regards,

Neil 

Hi Nrsk, 

I would recommend not terminating the unused output of the ADN4663. This will save on power consumption. You can also terminate this output, but the power consumption of the ADN4663 will be slightly higher. 

The ADN4664 unused input should not be left floating. I would recommend any of these options:

1. Connecting the ADN4664 unused input to the unused output of the ADN4663, so that the input is driven.
2. Connecting ADN4664 RIN2+ to VCC and RIN2- to GND. (Set unused output to logic 1)
3. Connecting ADN4664 RIN2+ to GND and RIN2- to VCC. (set unused output to logic 0)

Regards,

Neil