isopower ADUM521x soft start

Question

The datasheet for the ADUM5211 & ADuM5212 both mention "Soft Start" for the isolated supply voltage ramp up, but not provide and details characterizing the soft start. Is there any information that characterizes the turn on time for the secondary side? 
 
 Thanks

ADIApproved · Accepted Answer

Hi: 
 The soft start waveform is like below. soft start is completed within 2mS when output capacitor is configured as Table 3. 
 
 Figure 1 Start up waveform with 0mA load current 
 
 Figure 2 Start up waveform with 30mA load current 
 
 Regards 
 Chris)

Partner Forums

Partner Libraries

Products Mentioned

isopower ADUM521x soft start