AD204 OSCILLATOR DRIVE INPUT

Hi all,

Someone Can answer it to me?

Best Regards,

sss

Hi sss,

Apologies if we missed this thread. I already contacted the product owner of the AD204 and I will get back to you as soon as I've get any information that would answer your question.

Best regards,

Emman

Hi Emman-san,

Thanks for your reply.

It's very useful information.

Best regards,

sss

Hi sss,

According to the product owner of this part, the AD204 was designed many years ago and the datasheets did not include Absolute Maximum ratings.

He also added that knowing the AD204 module also generates internal voltages from the Oscillator Drive input, you should be safe operating with a +/-5% tolerance on the Oscillator Drive signal.

The Oscillator Drive Input on the AD204 module was designed to be driven from our AD246 clock driver module which has enough drive current to power multiple AD204 modules.

The frequency of the AD246 clock driver module is tested at the factory to be within 25KHz +/-10%.

I hope this helps.

Best regards,

Emman