Videos/Images

Explore your Ethernet PHY Software GUI!

CatherineR — Fri, 18 Oct 2019 15:20:39 GMT

Analog Devices Ethernet PHY products come with an interactive easy to install and use Software GUI. The Software GUI is for use with the Analog Devices MDIO interface dongle which is included in the evaluation kit. Each evaluation kit includes 2 x ADIN1300 evaluation boards and 2 x MDIO interface dongles.

The MDIO Interface dongle has an ADuCM3029 microcontroller and FT232RQ for UART to USB data transfer. Simply install the FTDI drivers and the Ethernet PHY software, connect a USB-micro cable to the MDIO interface dongle, power the ADIN1300 evaluation board from +5 V and launch the software GUI to get started on your Ethernet PHY exploration journey! Don't forget to connect your Ethernet Cable!

ADIN1300/ADIN1200 Robust Industrial Ethernet PHYs

CatherineR — Fri, 18 Oct 2019 15:13:25 GMT

This video introduces Analog Devices' ADIN1300 and ADIN1200 Ethernet transceivers for Industrial Ethernet applications. They provide low power, low latency, and robustness to operate reliably in harsh environments.

ADIN1300 Gigabit Ethernet PHY Evaluation board with optional MDIO interface dongle

CatherineR — Fri, 18 Oct 2019 15:07:10 GMT

The EVAL-ADIN1300FMCZ allows evaluation of the key features of the ADIN1200 robust, industrial, low latency 10 Mbps, 100 Mbps and 1 Gbps Ethernet physical layer (PHY). Each Evaluation Kit contains two EVAL-ADIN1200FMCZ boards and 2 MDIO interface dongles. User must supply USB-micro cables, Ethernet cable and power supply to complete the setup.

The EVAL-ADIN1300FMCZ is powered by a single, external, 5 V supply rail. All chip supplies are regulated from the 5 V rail providing supply rails required for AVDD3P3, VDD0P, and VDDIO. The user can connect an FPGA to the FMC connector on the back side of the board as the MAC controller. For the MDIO control, the ADI MDIO interface Dongle allows user interface to the 2-wire MDIO interface via the ADI SW GUI. The user can alternatively connect their own MDIO interface to the P5 connector. Visit the ADIN1300 product page for more detail.

ADIN1200 Evaluation Board for 10/100 Mbps Ethernet PHY with optional MDIO Interface Dongle

CatherineR — Fri, 18 Oct 2019 15:02:46 GMT

The EVAL-ADIN1200FMCZ allows evaluation of the key features of the ADIN1200 robust, industrial, low latency 10 Mbps and 100 Mbps Ethernet physical layer (PHY). Each Evaluation Kit contains two EVAL-ADIN1200FMCZ boards and 2 MDIO interface dongles. User must supply USB-micro cables, Ethernet cable and power supply to complete the setup.

The EVAL-ADIN1200FMCZ is powered by a single, external, 5 V supply rail. All chip supplies are regulated from the 5 V rail providing supply rails required for AVDD3P3 and VDDIO. The user can connect an FPGA to the FMC connector on the back side of the board as the MAC controller. For the MDIO control, the ADI MDIO interface Dongle allows user interface to the 2-wire MDIO interface via the ADI SW GUI. The user can alternatively connect their own MDIO interface to the P5 connector. Visit the ADIN1200 product page for more detail.