ADIN1110 configuration

any Help would be appreciated on ADIN1110 TX/RX register configuration procedure to bring up the link and writing to fifo?

  • Hello,

    The procedure to bring up a link with the ADIN1110 is described in the section "BRINGING UP 10BASE-T1L LINKS" of the datasheet (page 18).

    To start writing to the FIFO you can follow the steps outlined in "GENERIC SPI PROTOCOL" (page 28). In particular the subsection "Transmit Frame over SPI".

    Please come back if you have queries on any particular step of the procedure.

    Kind regards,