Post Go back to editing

ADIN1110 and AD2111 Board to board Communication (1.0Vp-p Mode)

I wanted to establish the communication between ADIN2111 and ADIN1110 EVMs with 1.0Vp-p mode to use the APL in Hazardous Location, but unfortunately couldn’t established link as well as communication.

Also, as mentioned in the datasheet we have configured both EVM’s to 1.0Vp-p mode using the TX2P4_EN pin (1-High).

Please find the communication setup and configuration below. Kindly help us by providing valuables inputs for below mentioned problem statement.