• State Not Answered
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 589 views
  • Users 0 members are here
Options 

        

            Post
             Go back to editing
        

    

    


    

    









		


















	
	
			
	
			
		
	
	
		

		
RapID-NI-V2108



		

			

									
					    Anaty
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Nov 9, 2021 
				
			
			
		
    

				
		
    
		    		    
		    
		    	
			
    Hi, team
    

    

    I'm having an issue with RapID-NI-V2108 kit. The Link/Activity LEDs are always off after I connected  Ethernet cable to either of the RJ45 jacks on the Network Interface module with PC. It means the link isn't established and I can't upload a replacement Bootloader and programs the Bootloaderinto flash. 
    

    My e-mail is c150c5325@163.com. Please help me, thanks.
    
									
			        
		
    

				
						
        

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    
















    
	
    
	
    
					



			








	
	
	
	



Parents
	
      
	

    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Jan 17, 2022 2:17 PM
            

            
					
      
	
      

		
		
      
					
      Hi Anaty, 
      

      Apologies for the delay.
      

      The behavior you are outlining is expected. The Ethernet functionality for this module will not be active until the module is initialized by means of a host processor.
      

      

      The Module number you have is configured for the Parallel Interface so you need to send commands over the parallel interface to initialize it. 
      

      

      What are you needing in terms of assistance? There are several paths forward.
      

      

      1. Reprogram with the UART so you can use NI_Test_IO from the PC.
      

      2. Initialize the device using the parallel interface library that is distributed in the Developer Portal.
      

      

      Please advise which path you want to take and I can assist you from there.
      

      

      Thanks and Best Regards,
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
				
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	
    



Reply

      


    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Jan 17, 2022 2:17 PM
            

            
					
      
	
      

		
		
      
					
      Hi Anaty, 
      

      Apologies for the delay.
      

      The behavior you are outlining is expected. The Ethernet functionality for this module will not be active until the module is initialized by means of a host processor.
      

      

      The Module number you have is configured for the Parallel Interface so you need to send commands over the parallel interface to initialize it. 
      

      

      What are you needing in terms of assistance? There are several paths forward.
      

      

      1. Reprogram with the UART so you can use NI_Test_IO from the PC.
      

      2. Initialize the device using the parallel interface library that is distributed in the Developer Portal.
      

      

      Please advise which path you want to take and I can assist you from there.
      

      

      Thanks and Best Regards,
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
				
						
				
				
		
		
      
			
		
      
	
      

      

      • 


    


Children
	
    No Data