ADRV9364-Z7020 + ADRV1CRR-BOB / How to Program Code / SO#174373

Question

Hi Tech SUpport, 
 Good day. 
 Customer purchased below two modules and needs to know that how to program own code through Vivado. 
 Do you have document/flow to show an example then customer can follow it step by step to test. 
 ADRV9364-Z7020 
 ADRV1CRR-BOB 
 
 Does customer needs to purchase extra programmer or ADRV1CRR-BOB has on board programmer? 
 After these two modules combine together, can it work stand alone or it must to work with another Xilinx development board? 
 
 Thanks, 
 Chris

iulia · Accepted Answer

Hi, 
 This is our reference design for the ADRV9364-Z7020 System on Module: https://github.com/analogdevicesinc/hdl/tree/main/projects/adrv9364z7020 . Please read the README file for clarification between the folders contained at this link. 
 This is the our wiki page for the SoM and here you can find information about the software that you can use with it and many more: https://wiki.analog.com/resources/eval/user-guides/adrv9364-z7020 
 Chris Huang said: how to program own code through Vivado 
 If you want to use our way of creating and building the Vivado projects, here we have documentation on how to do that: Creating/porting the design (although it is meant for porting the design onto another carrier, it provides information about the structure of a project), Building the project , and the Architecture of our projects . 
 Chris Huang said: Does customer needs to purchase extra programmer or ADRV1CRR-BOB has on board programmer? 
 You can use SD card. Just put the files on it and it's done. If you want to do debugging, then you would need a JTAG to USB adapter, because ADRV1CRR-BOB has only a JTAG header there. 
 Chris Huang said: After these two modules combine together, can it work stand alone or it must to work with another Xilinx development board? 
 It is standalone. 
 Best regards, Iulia)

Partner Forums

Partner Libraries

ADRV9364-Z7020 + ADRV1CRR-BOB / How to Program Code / SO#174373