How to copy and paste UTIL_ADXCVR ip to another project?

Question

Hi, 
 
 We have a zc706 and ad9172 evaluation board. There is example project(no-os) and reference design(hdl) for z706+ad9172 but we need to port example design to ultrascale architecture. 
 I did copy UTIL_ADXCVR ip by using tcl command and i sourced the tcl file on ultrascale project. My suggestion is that util_adxcvr ip was automatically reconfigurated. Do i need to reconfigure transceiver? 
 How can i port transceiver?

iulia · Accepted Answer

Hi, 
 AD9172 is contained in our customizable project called dac_fmc_ebz. You just have to do this to specify which chip you want to use; in your case it is already done, as AD9172 is the default one; the mode is set to 04 . We have already a project with ZCU102 (Zynq Ultrascale), and you can start from this one . 
 You shouldn't just copy that IP, but you should instantiate it in the design. Anyway, dac_fmc_ebz/zcu102 project has it already. Then you need to use the Transceiver Wizard to get the actual parameters. See this documentation: https://wiki.analog.com/resources/fpga/docs/xgt_wizard 
 Let me know if this answers your questions. 
 Best regards, Iulia)

Partner Forums

Partner Libraries

Products Mentioned

Associated Drivers

How to copy and paste UTIL_ADXCVR ip to another project?