AD9361 No-OS custom board with a10 fpga, TX tuning failed

Question

Hi, 
 I am trying to calibrate AD9361 on a custom board with A10 FPGA. 
 For initial setup, In RX mode AD9361 is tuning for 25MHz and 40MHz but not for 61.44MHz 
 TX is not at all tuning 
 What might be the reason for this error. 
 Thanks 
 Prince

andrei_g · Accepted Answer

Hi,

Yes, as a group, on Rx clock, frame and data should have the same trace lengths, similar for the Tx group. The interfaces are source synchronous, making Tx and Rx lines at the same trace length does not…

Electronic Design Services - PartnerZone

Products In This Thread

AD9361 No-OS custom board with a10 fpga, TX tuning failed

Top Replies