Frequency Hopping Example Design with ADRV9361-z7035 and ADRV1CRR-BOB

Hello FRK ,

Do you have any updates?

Iulia

imoldovan  I will share updates tomorrow. I hope I solved the problem

The findings related to frequency hopping for the BOB board are given below in a word file. kindly have a look at the document and guide us accordingly.

DOCX

Seems fine. If you are not connecting the data paths make sure you are not pruning them.

-Travis

I selected LOs frequencies as I did for adrv1crr-fmc reference design ( that is RF Bandwidth 50 MHz , Profile 1 2425MHz, Profile 2 2475MHz , dwell sample value 15000).

The above settings work correctly with Adrv9361-z7035+adrv1crr-fmc but not working with Adrv9361-z7035+adrv1crr-bob .

let me share how I am testing with  Adrv9361-z7035+adrv1crr-fmc

1- Input frequency span 2400-2500MHz , profile 1 2425MHz, profile 2 2475MHz ,dwell sample 15000

2- I injected RF_in from Signal generator any frequency within above span

3- I got output (DAC-Spectrum Analyser) same injected frequency   

but  i am not gettting same result with Adrv9361-z7035+adrv1crr-bob

BR

I selected LOs frequencies as I did for adrv1crr-fmc reference design ( that is RF Bandwidth 50 MHz , Profile 1 2425MHz, Profile 2 2475MHz , dwell sample value 15000).

The above settings work correctly with Adrv9361-z7035+adrv1crr-fmc but not working with Adrv9361-z7035+adrv1crr-bob .

let me share how I am testing with  Adrv9361-z7035+adrv1crr-fmc

1- Input frequency span 2400-2500MHz , profile 1 2425MHz, profile 2 2475MHz ,dwell sample 15000

2- I injected RF_in from Signal generator any frequency within above span

3- I got output (DAC-Spectrum Analyser) same injected frequency   

but  i am not gettting same result with Adrv9361-z7035+adrv1crr-bob

BR

What result are you getting? Have you verified with ILA that the IP generates the correct signals to the GPIOs?

-Travis

Thank you travisfcollins  . The Hopping IP is working with ADRV9361-z7035 and adrv1crr-bob now . I tested with two profile. I am closing this thread , if there are new queries regarding use of this IP. I will post in new thread ( my goal is to use this IP for more than 8 profile ).

Thank you travisfcollins  . The Hopping IP is working with ADRV9361-z7035 and adrv1crr-bob now . I tested with two profile. I am closing this thread , if there are new queries regarding use of this IP. I will post in new thread ( my goal is to use this IP for more than 8 profile ).