I have read the wiki: wiki.analog.com/resources/fpga/docs/build#folded_9943b6bcb4c422e395b6426a96f1e06b_1,but I can't get the information about which one use ad9164,can anyone tell me?
the project is::
this is a generic project for several DACs, so you need to specify the AD9164 and the JESD mode either…
The user guide for the DAQ2 can be found here: https://wiki.analog.com/resources/eval/user-guides/ad-fmcdaq2-ebz
Can you share the dac_fmc_ebz_zc706_vivado.log ?
the project is::
this is a generic project for several DACs, so you need to specify the AD9164 and the JESD mode either from command line or from the config.tcl file
$ make ADI_DAC_DEVICE=AD9164 ADI_DAC_MODE=04
wiki can be found here: wiki.analog.com/.../ad-dac-fmc-ebz
Thanks for your reply.
Before get your answer,I have made the project in the folder[hdl/projects/daq2/kc705] since the morning of Sep 10, now, Sep 13,the project have been working more than two days,but I still do not get the result.Is it normal?
I have successfully made the project[daq2/kc705] on an other computer,what should I do next?
I can see the .bit file in the folder[.runs->impl_1],that means I have got the result of hardware,but where can I find the software code?Is there a user guide or anything else that can tell me how to do next.
I also want to know where I can find the schemtic and pcb about the daq2,because in the block design ,I can see that the project not only includes a dac ,but alos an adc,I am very interested in it.
I didn't make the project[fmc_dac_ebz/zc706 or zcu102 ] successfully.When I input the code:make ADI_DAC_DEVICE=AD9164 ADC_DAC_MODE=04 ,I just get a ...FAILED .
I am trying my best to find the reason by reading the dac_fmc_ebz_zc706_vivado.log file,but it is really too hard to understand.