This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Adrv9002 with Xilinx zc706

Please help me.

How to The Gain tables for the RX, ORX and TX paths must also be loaded during boot/setup phase. They are also loaded using the firmware framework?

how to setup in petalinux 3 file ORxGainTable.csv, RxGainTable.csv and TxAttenTable.csv using in driver navassa

You can help me by step by step, thanks!




[locked by: AdrianC at 10:50 AM (GMT -4) on 9 Jun 2021]