acquiring data from DDC channel of AD9680

Question

Hi,
We have interfaced AD9680 Evaluation Board(AD-FMCDAQ2-EBZ Evaluation Board) with "XILINX KINTEX FMC HPC HW-KC705 REV 1.2".
Registers are configured as per "Table 23. DDC Example Configurations"(Dec by 16) in AD9680 Data sheet.
Configuration was done using ADI IIO oscilloscope.
We need to capture individual output from DDC's using ADI IIO oscilloscope. Is this feasible?

With Regards, 
 MEERA M.M.

AdrianC · Accepted Answer

Hello MEERA, 
 From the HDL's perspective, you could modify the design to M=8 and setup the other links parameters to bring the link up. 
 In order to have 8 channels instead of 2, the Linux driver or devicetree needs to be modified. Somebody from the software team can give additional details regarding that part. 
 Regards, 
 Adrian)

Partner Forums

Partner Libraries

Products Mentioned

Associated Drivers

acquiring data from DDC channel of AD9680