xc706 evaluation board that has XC7Z045 FFG900 – 2 FPGA support of 10 Gb Ethernet

Hello,

We are looking to get an XC706 evaluation and ADi9371 evaluation boards to use as a basis to develop our  radio board.

Does the XC708 evaluation board that has the FPGA XC7Z045 FFG900 – 2 support 10 Gb ethernet? And is this board the one that ADI recommends using with the ADI9371 evaluation board? Any specific rev numbers?

Also what is the part number for the clock device ( We saw it in one of yur videos) that is used to drive the AD 9371 evaluation board.

Thanks,

Cherif

Parents
  • 0
    •  Analog Employees 
    on Nov 17, 2020 9:53 PM 3 months ago

    Hello Cherif,

    We have support for ZC706 + ADRV9371.

    For the ZC706 we don't enable the 10GB ethernet in our reference design, although the board has an SFP+ connector. We don't use the 10GB Ethernet port in any of our designs, so we don't have experience with that. 

    Regarding the clock device, are you referring to the AD9528 ? 

    Regards,

    Adrian 

Reply
  • 0
    •  Analog Employees 
    on Nov 17, 2020 9:53 PM 3 months ago

    Hello Cherif,

    We have support for ZC706 + ADRV9371.

    For the ZC706 we don't enable the 10GB ethernet in our reference design, although the board has an SFP+ connector. We don't use the 10GB Ethernet port in any of our designs, so we don't have experience with that. 

    Regarding the clock device, are you referring to the AD9528 ? 

    Regards,

    Adrian 

Children