I use ADRV9009 and ZCU102.
I control the ADRV9009 via the IIO Oscilloscope.
But can I adjust the sample rate for the ADRV9009 on an IIO oscilloscope? (Rx path)
I need tuning for 30.72 / 61.44 / 122.88 / 245.76MHz and Data Capture for it.
You can Load profiles from upper right corner of ADRV9009 tab and select the adrv9009 folder you could load profiles for 61.44/122.88 and 245.76 MHz. For lower rates, you can generate a profile from TES, but for rates of 30.72Mhz, you should check on the ADRV9009 Support forum if they are feasible.
Thank you for the answer.
I looked at profiles directory in the IIO and found nothing about the ADRV9009.
Where can I find the file?
Look in the filters folder, otherwise, you can download profiles/filters from github: https://github.com/analogdevicesinc/iio-oscilloscope/tree/master/filters/adrv9009