Post Go back to editing

no-OS code of AD9379A?

Hello! I'm using the Xilinx ZC706 evaluation board and AD9379A FMC evaluation board.

According to, I have built a vivado HDL project.

Besides, I have built a no-OS project in SDK according to But the makefile can't  be used because "spi.h" is missed. I'm sure that I used the latest version.

So I add these .c and .h files to SDK project manually. And I have seen that the "spi.h" in isn't right and it can be represented by the "platform_drivers.h" in So the "include spi.h" in some .c files are modified to "include platform_drivers.h" by myself.

And I found that the "config.h" needs to be modified to meet the corresponding development board. After all the steps are done, I run the debug. But when running to the "dac_setup(&ad9739a_core)", "DAC Core Status errors" is shown in the SDK terminal. I don't know why.

Parents Reply
  • I thought I seemed to find the problem.

    These pictures above are the power supply on AD9739A evaluation board. I have found that there are no connection between JP1 and JP2 on the board. Besides, I have measured the TP12 TP2 TP1 TP3. And there is no voltage on the board! Does it mean I must solder a 0 ohm resistance on JP1 and JP2 pad?

No Data