DC2266A 16-Bit, 210Msps ADC FMC reference design and Linux drivers.

Hi,

This group doesn't have a reference design for DC2266A, and as far as I know, we don't yet have a plan to support it.
You can add it yourself, but this will take some time. You can start with https://wiki.analog.com/resources/fpga/docs/hdl/porting_project_quick_start_guide
https://wiki.analog.com/resources/fpga/docs/hdl

Andrei

Hi Andrei,

The  LTC2107 is nice bit of silicone, why there are no plans to support it?

LT  goodies not first class citizens?

Regards.

I support the LTC2107 and the DC2266 demo board.  I don't have any code for the zed board, but there is verilog for our own data capture engine.  Verilog_p2157_src.zip

Hello Clarence,

Thanks for taking the time to reply and provide some Verilog code.

Any chance we are going to start seeing more drivers/HDL/no-OS support for LT devices?

Last time I checked there were more TI ADC drivers in the Linux kernel than LT ones. 

There is a bit more than just characterizing parts with data capture engines.

Regards.

Hi Xyrtek:

there are no "LT" parts, only ADI ones. :) we are all one big happy family.

the group that does the FPGA and driver code responds to either (1) end user requests (like yours) or (2) internal requests from folks like Clarence. If we don't get requests - we don't add things to the list - since the list is already pretty long....

Andrei is right - now it is not on the list, until you asked for it - (and based on feedback from your local ADI FAE, who you should make the same request to - feel free to give them my name). We will have a look to see if the LTC2107 eval board is compatible with the standard Xilinx platforms (we don't support boards that only work on Zed Board, we need ZC706, ZCU102, KC705, KC102, Arria 10 SoC, Arria 10 GX) There is always a never ending maintainace burden of adding a new board (it gets added to test, and needs to be checked every 6 months on all the supported carriers  when we do a release). As you can imagine - things explode pretty quickly - so we don't do something unless people are asking. 

Hope that helps describe the process.

- Robin

Hi Xyrtek:

there are no "LT" parts, only ADI ones. :) we are all one big happy family.

the group that does the FPGA and driver code responds to either (1) end user requests (like yours) or (2) internal requests from folks like Clarence. If we don't get requests - we don't add things to the list - since the list is already pretty long....

Andrei is right - now it is not on the list, until you asked for it - (and based on feedback from your local ADI FAE, who you should make the same request to - feel free to give them my name). We will have a look to see if the LTC2107 eval board is compatible with the standard Xilinx platforms (we don't support boards that only work on Zed Board, we need ZC706, ZCU102, KC705, KC102, Arria 10 SoC, Arria 10 GX) There is always a never ending maintainace burden of adding a new board (it gets added to test, and needs to be checked every 6 months on all the supported carriers  when we do a release). As you can imagine - things explode pretty quickly - so we don't do something unless people are asking. 

Hope that helps describe the process.

- Robin

Robin,

Thank you for taking the time to reply.

The question was made to the general audience hence the specific board on the subject. However in the context of ADI/Drivers it is about ADI's Linux and board independent.

Glad to hear the Clarence mentioned my request to the FPGA/Driver group, please do keep me posted. Any of the ADI's supported boards will work for me.

Regards.