ADRV9009 supports mode "ORX and RX datapath using the same framer". As I understand, they will use the same physical lanes to transport data to FPGA.
But, in FPGA, one RX_PHY is only mapped to either RX or ORX. So, my question is: "does FPGA reference design of ADI support that mode?"
Thanks in advance,Trung Nguyen
it does not supports that, you need separate physical lanes and framers for each path. Please correct me AdrianC
We haven't tested the mode and it currently is not supported by the HDL reference design. We'll investigate and let you know if it's easy to implement.
We won't be supporting the mode in our reference design in the near future. We put it on our to do list, but will take a while until it's going to be available.
hi,i use the hdl project demo you provide.
i need to know the data order in the ip axi_adrv9009_core.
adc_os_data_i0[31:0]/adc_os_data_q0[31:0]/adc_os_data_i1[31:0]/adc_os_data_q1[31:0],when the sample rate is 491.52Msps,what is the data order????i want to get the right data from the 4x32bit data?how it comes?what should i do to get the right data??
Please don't post on answered threads. The discussion will continue here:https://ez.analog.com/fpga/f/q-a/119435/zcu102_adrv9009-orx-data-order/355459