I had heard that the A10 SoC development kit requires some resistors to be moved.
Specifically we heard the following with reference to using it with the DAQ card.
"You need to move 4 zero ohm resistors to bypass a clock de-jittering part"
If this is true where can i get the specifics on this? Is this also true for other boards such as the ADRV9371 or ADRV9009?
You can find the description regarding DAQ2 at:
For ADRV9371 the test pin and the gpio 18 are connected to LA05. On LA01 it doesn't have anything connected, so it shouldn't matter.
For ADRV9009, on the default configuration of the evaluation board, LA01/LA05 are not used, so the modifications are not needed.
LA01/LA05 are the FMC standard name for the pins. On the schematic they appear also as D08/D09 and D11/D12.