I am using a Zynq UltraScale+ MPSoC ZCU102 +ad9361, revision 1.1. I followed the instructions and build an SD card containing ""zynqmp-zcu102-ad9361-fmcomms5" image.Boot results are here: : https://gist.github.com/radcristea/b869ca64d6ed0a47e896b93015a896c6But no image on HDMI monitor(HDMI port used with a HDMI to DVI adapter). No image on the DisplayPort (adapter also used).
UPDATE: I have changed the monitor three times, checked HDMI ports and the DisplayPort.I have used a DisplayPort - DisplayPort cable. The point is that I don't think the problem stands with the monitor and the cables.
What do you want to get working DisplayPort of the FMCOMMS5 ?
Yes, as I've written above, no image appears when I use the HDMI port or DisplayPort.
Which linux branch are you using right now?
Can you try to copy xorg.conf to /etc and not /etc/X11 ?
If you use the 4.14 kernel from master try this:
root@analog:/etc# cat xorg.conf
Option "DRI2" "true"
Option "DRI2_PAGE_FLIP" "false"
Option "DRI2_WAIT_VSYNC" "true"
Option "SWcursorLCD" "false"
Option "DEBUG" "false"
Yes, I have tried.
Still the same problem.
root@analog:~# cat /etc/xorg.conf
Option "fbdev" "/dev/fb0"
Try to get help on the Xilinx forums.
Their DisplayPort support is known to only work on certain monitors.