I want to run the ADV7511 on my zedboard,and my vivado is 2018.3/2019.1.(https://wiki.analog.com/resources/fpga/xilinx/kc705/adv7511#dokuwiki__top ) Maybe this project is not support vivado 2019.1,so I try it on my vivado 2018.3.
From https://ez.analog.com/fpga/f/discussions/103444/adv7511-reference-design-not-working-on-zedboard/307007#307007 and https://ez.analog.com/linux-device-drivers/f/q-a/109298/dmac_core-header-file-missing-for-adv5711-zedboard-reference-design ，I found that I can only use 2018_r1 hdl and no-os, because the 2019_r1 doesn't have no-os branch and 2018_r2 no-os branch doesn't have dmac_core.h. But when I source 2018_r1 , I have encountered the following problem.I can click the " run connection automation" button to connect them in vivado, but the TCL has stopped.
ERROR: [BD 41-758] The following clock pins are not connected to a valid clock source/axi_spdif_tx_core/s_axi_aclk/axi_i2s_adi/s_axi_aclk
ERROR: [Common 17-39] 'validate_bd_design' failed due to earlier errors.
while executing"validate_bd_design" (procedure "adi_project_xilinx" line 100) invoked from within"adi_project_xilinx adv7511_zed" (file "./system_project.tcl" line 8)
Can you give me help? Solving the problem that 2018_r2 without dmac_core.h、config.h is also OK. In addition, this routine has a Linux system version?
You should use hdl_2019_r1 HDL branch. DragosB will help you out to find the required no-OS/Linux branches.
Thanks,how can I get in touch with him?
I'm running into the same problem.
Were you able to find the proper no-OS/Linux branches for the hdl_2019_r1 HDL branch?
Did this solve your issue?