Error returned when trying to read the Power Quality library's "pack" file into the Keil development tool.

Hi,

I was able to unzip the pack file onto a fresh Keil installation and build the project. Please ensure that you are using Keil MDK 5.34.

These are the steps that I followed.

1. Unzipped the Power Quality library evaluation version downloaded from here .

2. Double click on the .pack file within if uVision is added to path. Or open with Keil's PackUnzip.exe . Press next and accept License agreement. Project should automatically unzip and give a prompt "unzip successfully completed "

3. Follow Examples Pg31 onwards of PQ Library user guide to configure uvison to run pqlib example. When prompted install missing packs.

4. Navigate to Keil projects installation directory and open the pqlib_example.project.

5. Make sure the project is user-writable. (run keil as administrator)

5. Build in Keil with appropriate Device/Target . Then Flash the .hex file generated to board as shown is PQ user guide.

Regards Aditya

Hi Aditya,

Thank you for trying this and your detailed instructions. Here is a snap shot of the version i am using which is 5.43.1.0. 

As I had mention previously, we  have already downloaded the PQ Library back in 2024 but the version  is the same as yours.

Questions: 

Could the newer version of the microvision tool be checking more? 

How can I get the particular version you are using? 

If I already downloaded it and accepted the agreement do I need to accept it again to get a new version? 

Can you share the PDSC file so I can compare it with mine?

Thanks - mike

Hi Aditya,

Thank you for trying this and your detailed instructions. Here is a snap shot of the version i am using which is 5.43.1.0. 

As I had mention previously, we  have already downloaded the PQ Library back in 2024 but the version  is the same as yours.

Questions: 

Could the newer version of the microvision tool be checking more? 

How can I get the particular version you are using? 

If I already downloaded it and accepted the agreement do I need to accept it again to get a new version? 

Can you share the PDSC file so I can compare it with mine?

Thanks - mike