PQMON Hex File Original Coding // C or C++

Hi YongLawrence ,

1. The hex file is generated if you follow the make procedure indicated on git or on the wiki page. You will find the ".hex" file in the following path ~/no-OS/projects/eval-pqmon/build/eval-pqmon.hex. 

The hex file is generated from the project that can be found in the repository.

2. Here is the list with the supported MCUs https://developer.analog.com/docs/codefusion-studio/1.0.0/user-guide/about/supported-processors/

Pqmon is using max32650 which at this moment is not supported.

Hi REtz ,

1. You will find the ".hex" file in the following path ~/no-OS/projects/eval-pqmon/build/eval-pqmon.hex. 
   • I can't find the build folder and hex file under the path. Maybe is another branch.
   • Could you provide the Github link?
   • 
2. The hex file is generated if you follow the make procedure indicated on git or on the wiki page.
   • Are you refer to Equipment needed [Analog Devices Wiki] >> Firmware update building the project >> Build and run?
   • If yes, strange that I can't find the coding in the Makefile
   • 

YongLawrence 

1. I was referring to the path on your computer where you have the no-OS clone.

Please take a look at these guidelines No-OS Build Guide [Analog Devices Wiki]

2. The make procedure refers to what you need "to type" for example in the terminal to build the project.

No-OS Build Guide [Analog Devices Wiki]

Hi I follow the No-OS Build Guide [Analog Devices Wiki] and got error: Makefile:8: *** 'No PQM library path defined'. Stop.

Is it because missing build.json? Please refer Error Video

Error Video:

 YongLawrence Hi, After you followed the standard procedure for no-OS build you must follow the specific one for PQMON indicated on the wiki page. You are using the PQM library so you have to download it and follow the steps indicated on wiki: