Voltage and Current Reading Are Different To Power Source Settings

YongLawrence Hi, The value set in omicron for the ac signal is rms or the amplitude of the sine wave? If it is rms please check then the rms value in the first window of Scopy where the rms values are shown. The waveform shows the ac signal. So, in the second video you have the amplitude of the sine wave. Regarding the DC current, the current transformers provided with the kit are Clamp Type AC Current Sensors.

1. The value set in omicron for the ac signal is rms or the amplitude of the sine wave?
   1. It's amplitude of the sine wave.
   2. References: QuickCMC Part I > 3:33
2. Regarding the DC current, the current transformers provided with the kit are Clamp Type AC Current Sensors.
   1. Any Analog Device's part is recommended to measure DC? 
   2. or AD-PQMON-SL is specifically design for AC only (since it's monitor Class S event)?

 Hi YongLawrence 

1. I tend to believe that is rms value because as you can see in the video capture or in the reference video you have there VA. The VA value in your case is the product of the two values you introduced so they are the rms values.

2. It is designed for AC.

You're right REtz , I just confirmed that Omicron CMC 353 is RMS value. 

Thanks for your explanation.